Jump to content
Airsoft Forums UK

shando664

Members
  • Posts

    5
  • Joined

  • Last visited

  • Feedback

    100%

Profile Information

  • Guns
    VFC AK-74
    LCT AK-105
    RS SVD
    NPO VSS
    Ares Vector
    Kar-98k vsr conversion
    MG42

Recent Profile Visitors

688 profile views

shando664's Achievements

  1. Is the rail actually tight to the upper receiver? I have the 9" installed on my G&P and it's rock solid with no sag, It almost seems like you've over snugged some of the bolts causing it to bind against the upper and thus point down. As for the lower rail not fitting past the bolts, it does seem as if yours has been supplied with larger than normal bolt heads. #
  2. HaVe YoU cOnSiDeReD aNsWeRiNg YoUr MeSsAgEs?
  3. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Need to undo the heresy on my ak-105 and need some parts I should have specified this is for an AEG, so the pistol grip would have to be aeg specific aswell as possibly the folding stock mount- gas tube assembly- upper handguard in black polymer- standard pistol grip in black polymer- folding stock in black polymer- ideally an ak105 flash hider but the aks74u types are close enoughnot fussed about brand (cyma/e&l/lct/tm/etc) but don't expect me to pay what uk retailers are charging for a 3 quid part for example >:lpicture for clarity

    NO VALUE SPECIFIED

    London

  4. As previously stated, turn the secondary regulator all the way down (anti clockwise - i realise this feels odd) and it'll vent the vast majority of the contained air. To remove the secondary reg while the tank is rather full can be an arse but I found using a bench vice on the sides and turning the bottle itself gave me enough leverage to loosen it. It'll still be a bit stiff as the pin on the primary reg is still under pressure and you can't disengage it externally on the balystik.
×
×
  • Create New...