mightyjebus

yup, I got that wrong and you are correct.
on another note I seem to have acquired another one.

 
Things worth mentioning are:
any attachment on the front end of the gun have a tendency to work themself loose because of the recoil so you need to make sure you tighten them up well or use some sort of thread lock.
They destroy chinese optics or at the least throw off any zero within a couple of shots.
The FPS is very consistant even to the point that I thought my chrono wasn't registering shots because the results were the exact same.
The standard hop/inner barrel with a FPS of 320 feels very Marui like in accuracy and range. with the slightly higher FPS than a standard Marui it reaches out accurately to 60/65 meters once the hop is set (I'm using 0.3g BB's).
because the trigger has a soft uptake before the break I'm finding that I can hold the trigger on the break for long periods before snapping of a very quick first shot and because the break is solid I'm not too worried about shooting myself in the foot by accident.
 
I'm a few full days in now with these and I really don't feel like I want to go back to TM recoils, PTW's or GBB's. I'm not saying the GBLS is a better AEG but for me the shooting experience is better.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

They are a copy of the Knights Armament iron sights and allows you to be a cool German SF type.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

Valid comments however Army made a nice clone of the recoil M4's (I've got one here that works a treat) and CYMA knocked out a recoil AK which was slightly better than the TM version because it took normal AEG AK mags straight out the box.
I still think TM lead the way as all the other innovations have either been expensive, failed or both. Systema PTW, ICS split gearbox, GBLS, TOP shell ejecting AEG to name a few.
Now it's unlikely TM will be reading this but just in case, hurry up and make a recoil G3 and stick a mosfet in the M4 recoil platform.

No, it's a copy of the original type 3 AK recoil from TM. It's a CM.046 if you want to check it out.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

I like my VFC MPX AEG but I've never been a fan of the fat handguard. So off to the secret underground lair and I knocked up a version I prefer.

Looks good! Though I had to do a double take at first. That sling made me briefly think it had a thumbhole stock on it XD
 

thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.

thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.

thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.

I like it. it's a Striborg SPG9 which is unofficially known as the poor mans ARP9 but seems well liked by the shooting community in the US. I made a 3D printed version a while back.

did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
 

Next up I printed some of the impact grenades in a luminescent filament I had floating around.


and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.

so good news and bad news. I replaced a few more parts and managed to fix the ECU. It ran for about 1 mags worth of BB's and died again once I did a bit of rapid semi auto.
 
*EDIT*
So I stripped it down again and luckily the motor connector had come away from the motor and once reattached the MP5 is now running fine. I'll give it a run out next weekend to see if it holds up.
 
It's looking like I fixed the ECU. 

did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
 

Next up I printed some of the impact grenades in a luminescent filament I had floating around.


and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.

did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
 

Next up I printed some of the impact grenades in a luminescent filament I had floating around.


and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.

Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.

Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.

did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
 

Next up I printed some of the impact grenades in a luminescent filament I had floating around.


and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.

did a couple of things 3D printer related. First up, as I'm an idiot I managed to break the stock catch on my Well PPK20. Well make the part replaceable but currently there aren't any parts available so I designed one and sent it off to be printed in aluminum. I got a few extras for when I'm an idiot again.
 

Next up I printed some of the impact grenades in a luminescent filament I had floating around.


and lastly I designed a ammo tin styled box for the impacts for no other reason that I wanted to use my laser cutter.

Bought the S&T HK416 PDW with the idea of stealing the front end for my TM 416C recoil but sadly the rail doesn't fit. Since that meant I was keeping the S&T in one piece I binned the terrible PDW stock with a HK marked stock I had floating around and stuck on some HK iron sights as well. turns out it's quite a nice budget AEG.

I just used a bunch of old aeg springs I have floating around. doesn't seem to need a M110.