Hef Legend

Dentonboy, I ordered the same one as you £15 from Airsoft Zone woop woop

Good stuff. You gonna try out the Chailey site?!

I'll be using it at the mall this weekend. After the mall we need to arrange a game at Chailey

What's up mate ?

just thinking of picking up an cheap gun and was going to get someone to whack some parts in, AOE/Sorbo and mosfet. Crawley surplus have a 6 week wait as the tech is going away.

As long as you don't go too nutz a stock gun will be fine for a little while until you can get it tweaked properly. trigger contacts should be fine for Mall unless you run 11-14 lipo's 65c. Up to 20c 11.1v for a little while should be ok

Well I'm working on something to use so will bring a spare or two anyway so by all means have a go anybody & thrash the bitch. If I used it it wouldn't get much action coz I suck so badly

I've pm'd the Predator guy, but to be fair he might be waiting to skirmish it and see how she goes before commenting if all ok now on juicier lipo's

F*cking GOS-V3 is crap, even some ol skool 9.6v nimah's are tight squeeze. Think I'm flogging this tight ar$e crap stock on fleabay soon. Seriously glad I put stubby on there

Seam lines galore?

Nothing fits properly. Magazine well is shite, tolerances are all off. Bloody annoying as it looks good. Just needs to be modded loads to actually fit

replace the switch block, couple of quid for the component

My tech skill on anything other than a GBBR or sniper is shite lol

to me it sounds like you would do well to switch to v3^^

Hey Prof, I still have a P* MK12 I'm debating selling or keeping. 500mm would be perfect

Prof, my SVD has a 709mm long barrel lol

Jeebus.

Are you staying over and playing Sunday?)

sadly not fella, just coming up for the Saturday game. Had a change of plans that weekend

Sugar soap tends to work good.

Slightly different receiver too. I think the TM has two cylinder guides whilst the JG one has one.

it's the Gspec one, I'm guessing then that at the normal parts fit.

Yup. 100% compatible from what I've found. Also no crimped cylinder.

I was just a bit confused as last time I had an AEG I was advised that you couldn't something to do with the stock tube being part of the body

Sounds like bollocks to me.

take the stock off and look at the buffer tube, there is normally a cap on the end and then a screw or bolt holding it on, if you can do that you can install 99% of stocks.

If ya truely up $hit creek I may have a 2-part receiver pin. One with a Allen key on one side.

Doh, they are the only place in the UK I can find stocking the Laylax VSR10 bolt

The LayLax bolt is silly money though. Action Army do an excellent G-Spec bolt handle if you want something more ergonomic :S

Specifically after that style and for the VSR pro.

What do you mean?

To fund a house? how much are you selling it for?

Renting not buying lol and It's being sold cheap as I'm after a quick sale I was lucky enough to get the majority of parts cheaper than retail through contacts etc No need to be greedy when I don't need to be.

Thanks squire

De icer works better.

I've been using alcohol wipes which took the paper backing off but not the adhesive. Didn't want to end up with all white spirit or whatever getting all over the barrel etc when cleaning the fore grip.

hairdryer was always good to warm label, soften the adhesive and most comes off intact - bit late now but might worth a shot of warming the remains

Think they do that when stuff is out of stock - they hope you won't notice. They once send me a grenade pouch instead of the radio pouch I'd ordered. When I phoned up they said "well they're about the same size, the radio will fit in the grenade pouch". I had to point out that if I'd wanted a grenade pouch, I'd have ordered one!!

They are sending me the correct one and I'm sending the other one back, annoyingly though...They aren't sending it direct to me, I have to go get it from a UPS access point :S Customer service seems alright so far though

Potentially......a halo SMG kit to fir an AEP glock. http://orig09.deviantart.net/86a4/f/2011/060/6/6/halo_smg_by_matsucorp-d3apar5.jpg & https://www.yourprops.com/movieprops/original/4cd41e37a098a/Halo-video-game-HALO-SMG-1.jpg

Printing it would be pretty simple its drawing it and getting the sizes correct that would be the problematic part.

I had a quick look on a couple of sites and couldn't find a suitable model. But did find a few that could be modified. 3d printing is cheap its all the drawing time that costs.

Yep

Just wondering... Are you wanting that spring change for CQB use?

No, just so that I can use my rifle at certain sites and not have the MED. Already have a 450fps spring for everywhere else. CQB with a sniper would be an interesting challenge though lol

Xfire from japan

Airsoftpro.cz

Both of the above will cover everything that you could possibly want (minus perhaps the AA hop unit - WGCShop or Airsoft World).

Welcome back mate. Seen some of your pics, looked a nice place hope you had a great time

Cheers fella, it was really good, admittedly every time I went into the old towns/local areas I kept thinking, this would be good for Airsoft lol

I find myself doing that all the time mate lol. Sometimes it slips out and the missus just isn't impressed haha