Leaderboard

Decided to take advantage of the snow and take the Tropentarn out to play. Works pretty darn well.

Well all OK, the eye doctor said that the eye has been grazed and will be ok in a week. I got seen very quickly despite a member of staff saying that they are short on staff from illness. As for the graze, it was caused by the force of the BB on the bottom eye lid, its going to be uncomfortable for about a week. So all good in the end. I am looking in to face masks as I want one for my son to use with his glasses and it needs to be full face and found a helmet with a full face attachment, only I had to send it back because the rails were a bit Janky. It really needs to be the fast helmet type as well... So I may be asking lots of questions in the near future...

101% this ! I’ve had days where I’ve only played half the games and shot no one all day because I’ve been too busy socializing with players that we’ve not seen each other in ages . I know this really annoys some players but as long as it’s not affecting the game day(talking in the briefing/not paying attention/delaying game start/etc)then who cares if someone hardly plays most of the games and just socializes ? But equally I have game days where I’m a positive god(in my own mind😇)of war and really set out to do as much as possible to win . Just play so your happy at the end of the day . You get the ‘only play to win at all costs’ in every facet of life , think it’s just in Airsofting it can be more noticeable than a lot of other sports perhaps ? Me personally I’m like you I don’t actually care wether we win or not I just want to enjoy the day . Then again I know my willy works !😉

Lacking support...

I can now add to this topic with my experience with TM gun - I have also posted here regards to upgrades of that gun. I have TM AK-102 EBB that I was not perfectly happy with - especially the range on it (quite possibly because as I later found out the bucking was torn). After discussing the upgrades with people here and friends outside of this forum I have decided to replace only the barrel with tight bore and fitted prometheus purple bucking and nub. It's almost like completely different gun now - the range is just fantastic on it and as I also using it with .25s the speed of the bb is decent.

After trying the i5 I brought one as soon as I had the money. It's literally like putting your face in a form fit pillow. The filed of view is amazing and they are basically impossible to fog. With my glasses the fit is like I'm not even wearing glasses. Super comfortable! The best part though is the ratchet strap system. You just slide the mask on and twist and you are good to go. No annoying straps. But like you said the down side is the face coverage. Sure it makes the mask light but there are gaps on the sides of my jaw and like you said the forehead. I have a little cut right now on my jaw's edge.

Can't agree enough Druid. I used one of those generic crossdraw vests until recently. Quite liked it but way too many pouches for my uses, plus the velcro mag pouches are fiddly as heck. Went low-drag for my sci fi armour build, two generic belt pouches that can hold STANAG, AK or whatever, anything from 2 to 6 mags they can hold, elastic cord on the top so much less fiddly. Until its finished I'll just be stuffing a couple of hicaps in my pockets.

Dicking about, trying my new (to me) Hi Capa

There’s a lot to be said in favor of a minimalist chest rig , I’ve got a good few now in different camo’s most I’ve mod’ed so I can get 6mags on them(I split and re-sew the pistol mag pouches together so it’ll take a primary mag) and a dangler pouch on it as well and it’s good to go 👍

Bin it. A good charger can be the difference between ashes and a home.

Yeah, I really changed them because I like the shorties and they are amazingly flexible. In fact I was trying to reduce the power output since they are slightly above the limits. Not had any range issues in woodland games so far.

I do not recommend anyone taking the prescription safety glasses route wit the Riley brand. https://www.riley-eyewear.com/swarm Two Reasons. 1. They have a trim that is not moulded but "clips" to the main safety frame, this (sides) will come off easily. (The grey 'flare' bits by the arms pop off) 2. I am off to eye casualty after last nights game, someone had a spicy RIF and a BB was able to get under the safety barrier and hit me in my eye. I have had to wait all night to book in at 7am and wait to be called in by them. So no matter how much your optician tells you that these give all round face hugging eye protection, its BS. The fact that a BB can get in from hitting my cheek bone at the eye socket, make its way under the rubber seal, to me is clear indication that they are not in anyway suitable for airsoft. They were not cheap either, £165 from Vision Express. Not exactly express either as it took 3 weeks to get them to start with.

The Royal London Chest Hospital in Bethnal Green has been empty since 2015, waiting for redevelopment. Pretty cool location and looks like it would make a decent, albeit temporary CQB site. I wonder if anyone's already looked into it. https://www.28dayslater.co.uk/threads/royal-london-chest-hospital-august-2015.98714/

Anyone got links to plus sizes for example DPM desert gear etc? now before someone says lose weight which is a silly answer, I am a 56-58” chest and a professional body builder, not overweight. any help apppreciated

Classiest Vector I have seen, simple build and the green suits it well 👍

I have witnessed similar on a rif with dirt in the magazine causing BBs to catch/stick/suddenly get shaken free/jam even tighter. Happened both to hi and mid cap mags. Fingers crossed it's a simple fix, whatever it is.

Ucap had the use of the Kingston victorian prison in Portsmouth. That was listed and awaiting development for prestigious apartments. We had it for approximately a year. It was a bit of a mess but as everything was built to withstand the wrath of 'wrongly accused'murdering maniacs,we didn't do much damage with our plastic balls 😄😄. I think a hospital would be just what the doctor ordered. 😉 Regards

Glass to break Hard smooth slippery floors to fall over on Stairs to trip Bannisters to fall over Equipment Light fittings for dickheads to shootup Corridors to form bottlenecks Rooms with single entry You want to be able to condemn elements of infrastructure to allow its destruction, breaking holes through walls etc - without it collapsing Remove glass, board it up or at least cover it in vinyl etc ….. and have enough of a time frame to use it before it’s developed Then open as a business and take on the rates bill - unless a developer is committed to holding the property & underwrite paying the rates with a willingness to let a business come in for the rent income Take a stiff drink before asking for insurance quotes

Like mine? 😃

Has been a funny few days. Started off doing the airseal which for some reason dropped the fps by 5 or so but was more consistent. (Could be due to friction of the oring) I noticed that the CM048m Nozzle length is the shorter nozzle instead of the longer one. The longer one worked perfectly fine but I think having the intended length is probably best so I swapped to the shorter one. I also then started upgrading springs as the one in the gearbox from stock (I take it whoever supplied PB with the cyma aks puts these terrible springs in to get under 350fps). I was recommended a m105 by ak2m4 and to our surprise it was shooting at 400fps. I also bought a ZCI M100 at the same time to drop in if the 105 was too high and that is still a bit hot at 370. I'm thinking I should now get a m95 or m90 and go from there. Once I got it where I like it I will do a bit of a in depth guide for the gun as a whole on recommended parts and etc.

Sadly I agree with you , I see a player in a speed S’ofter get up , I hear a ripsaw noise from a gun or see the infamous hose from gun to somewhere else I automatically think “better watch them , just in case” . Just the nature of the beast I suppose ?

then use those

I did end up taking it... just two BBs in there, and I could already move them around against the nozzle, they just refused to drop down the feed tube. I even fashioned a spring hook from a bit of dowel with some bent guitar string attached to the end, but I couldn't coax them out of there. (If someone can manufacture a BB-puller for this situation, they could surely earn a few quid, certainly I'd be first in the queue) Anyway, AK now in bits, barrel given a quick clean with bit of cotton. I've mentally noted not to use cheapo BBs in that gun every again, and it's all ready for my next (cosmetic) purchase to arrive... if I go ahead with it that is. New thread *** incoming ***

Spambot in training 🤣

Just get a Warq and wear your normal glasses underneath, no steaming and total protection

I would reword that to looking a paintball goggles. Dye is not the only contender - their premium masks are known for being compact - which translates to not being good for large heads such as mine (which is a moot point when comparing glasses style to full face goggle) The Dye i3 full face goggle also had an airsoft specific snow/skiing style equivalent goggle without the full face element, and the i3s could be dismantled for the same effect Other premium goggles are available, and each design has its pros and cons for different heads Even cheap goggles are great if they are the right fit. I bought a pair of Sly Annex MI7s just for the multicam style colour scheme) (now likely to be marketed here as Valken). They are just basic rental grade in hard plastic - but they fit my head just right, and have good air flow My second ever goggles / first new goggles were the Dye i3pro with these my forehead was always exposed (but resolved with a headband, backwards baseball cap or beanie etc), my chin remained outside and whenever I spoke my mouth was exposed I tried on the i4s - even less coverage Ive not tried on the i5s I would not call Dyes ‘designed for glasses’. They do have great airflow - but most of that is because of how little they cover faces Every premium goggle should cover airflow, and seal the eye area away from your breath The perfect goggle fit for me are the Angel eyes but their full lens design has not made it through standards, and despite the reattempt of the C2 Eyon they have never made it to market My preferred goggles are the VForce Grills, which actually are designed around glasses - including slits in the soft foam for your glasses arms My standard recommendation for goggles is to try them on - everyone has their own opinion and the only way to know what’s right for you is to try some

5 x UV5R 2 x UV9R waterproof model Run the 18" aerial on them, provide coms for all mates for Airsoft and Skiing. they replaced a swathe of MT50 PMR's I have a licence for them. no issues what so ever with any of them, but I get them from Baofeng UK direct to make sure I dont get fake ones

Looks like my first toilet visit the morning after a Bhuna.

The Krytac Trident MK-II PDW should be OK for woodland combat. Of course we all want different pewpews to play with 😉 Yeah, a DMR would give different gameplay.

This can lie in the fine detail - the page you linked refers to ‘impact resistant lenses’ - and as you’ve identified, the combined system has scope for clip in parts to be seperated e.g. Suitable for some impact situations and not for others This is the main issue that I have with all of the glasses types of eye protection. Fine for head on impact, very easy for BBs to work their way around - another example of ‘suitable for some impact situations, not for others’ I hope that you don’t have any lasting problems. Good luck

I’m sorry IMO, What a gimmicky piece of shart 😂 Speedsoft yourself into oblivion my saaahn

Another vote for a name tag. I have mine on the back of carrier. Easy to see if youre looking at my back and it's short, easy to yell.

Another one for name tags , I’ve got ‘Druid’ in multiple camo patterns and colors so I’ve normally got one on my shirt and I always have at least one on my rig , I do find in game that my fellow red/blue/etc team members are more likely to call out a warning or ask for assistance when they’ve got a nickname/call sign to use instead of “oy you in the camo gear !”🤦‍♂️ At my old site everyone knew me as Druid a team mate was known as little bear(his online name is stwpid Bear and he’s a short arse !) another friend is known as CoM(center of mush as he ALWAYS gets shot in the face !)and another is animal(simply because he is one !🤣) in what I’d consider my ‘inner circle’ of player/friends we use each other’s actual names but outside this it’s all nicknames . I do wonder if the other players especially the newer one just seemed happier calling us by our nicknames because there less formal than your actual name ?

Loving that KKV and the nice simple chest rig. Smart loadout.

But also: "1. The game is physically and mentally intense and may require extreme exertion to play." But no running. Do they make you do push-ups before respawning? Why do they call it a waiver? Tell me they don't have... "Release: I hereby release, remise and forever discharge from any claims and liabilities whatsoever without limitations that I might have against FREE FIRE ZONE Ltd. and the owners of the property on which the game is being played." It's never not funny that people actually waste their time writing that, or making you read or "agree" to it. 🙄

Cheers 😊. There's not much to see as a 'build' yet, once I get the spray paint on it, and start hacking the front end to get a RIS rail and stubby grip on it, then it will be a build I've got astigmatism too, but it's working fine for me with my toric contact lenses. Lucky I guess! One thing I've noticed with this red dot is it is very small and low profile. So too low when I'm wearing my OneTigris mouth/ear protection. So I'm going to buy a riser rail for it. Well taking of airsoft scopes, I didn't get on that well with my old 4x32 scope on my M906, but I'm very tempted with this at £20... https://www.actionhobbies.co.uk/products/3-9x40-ir-zoom-scope/ Looks a bit of a bargain, but I'm spending some money on other things first... Expect another post in this thread soon 😋 Yes definitely interested in that! That looks superb for the price, I was willing to risk the sight rather than fit the usual type of lens protector in front of it.

The Tuna build's lookin good @RostokMcSpoons. I like the idea of a simple RDS and bought one from Amazon last summer, sadly my eyes didn't agree (astigmatism) I couldn't get it in focus no matter what I did, so back it went. Fiddlesticks. It's a pity there don't seem to be any airsoft F2000 scopes around, cos that really would look the dug's baws.

the no running on site clause on the Freefirezone insurance waiver always amused me...

Played with a guy who had one. He said tracers you "only" get about 3 of the colours, if you use white BB's then you get "all" of the colours. I dunno. I just use a normal tracer.

Fair point, Mrs Borg has fast walking trainers, and slow walking trainers, and several pairs in between. I refrain from questioning that, as she chooses to accept that I only have one black gun, and one beige one.

>shoots rainbows Perfect for me and the squad

Chest rig and keep moving. Free mag heating from the warmth emanating from within, powered by the smugness of knowing I have the superior airsoft system with which to play a glorified children’s game of hide and seek.

Terms: P* (Polarstar), OOTB (out of the box), DI (Drop In), CR (Cylinder Replacement), MC (Mancraft), W (Wolverine), ME (Mechanical), FE (Fusion Engine) So Im in the US, which means HPA is far more common and available. As far as I know I have used quite literally every HPA system out there, barring a few unique or uninteresting ones to me (Russian "bear", Im looking at you). Daytona, Escort (pre-Daytona), W Inferno, Reaper, Reaper M, SMP, Hydra, Bolt, Bolt M, P* FE v2, FE v3, FE 249, Jack, F1, F2, Valken v12, Tapp HPA adapters, CQBRussian HPA taps, custom one-off HPAs, Redline engines, MC sDiKs, and probably a few others Ive forgotten. Ones I havent used include the P* Kythera, Redline MilSim, the aforementioned Russian "bear" (aka MedVed), and as stated single-gun engines like the old JACs. P* is, by far, my favorite for a few reasons. First, LCD FCUs. Wolverine engines are a PITA to adjust to exactly what you want - the older versions using two screwdriver dials, and the newer having an extremely basic FCU with lights to show settings. P* is all written out on an LCD screen, like a calculator screen. Second, are FEs. The only true drop in and go engines (besides the v12, but we dont talk about the v12) means you can keep your AEG gearbox together for a rainy day, to shove into another gun, or to use as spare parts. The F2 has the power of the FE but is a CR engine, like almost everything else on this list bar the Daytonas. Basically this means it uses your old gearbox. Closely following this is the Wolverine Reaper. While Ive found the F2 to be an easier drop in, theres no denying how quiet and air-efficient you can make this top of the line wolverine engine. If the FCU was better OOTB it would be neck and neck with the F2, and if Id not had to work so hard to get Reapers to work well in some odd guns itd be ahead of the F2. W then makes an interesting engine - the Hydra. The Hydra is made for all those offset nozzle guns. Im not a huge fan of the engine itself, having not-great experiences with it in my P90, but if you have an offset gun and dont want to design an entirely new gearbox (something I have done a time or two) its your best option. P* has made offset nozzles for the F2, but they arent too common (still looking for a PDR-C nozzle...). A few notes about some of the other engines. The V12 is trash. Easily the worst HPA system out there and not worth looking at. The Jack is the worst engine that is actually worth the time to install in your gun. Personally Id avoid it if you can. The only one I still own is in my Marui MP7, as thats literally the only engine that will fit in it. The F1 is just a closed-bolt Jack. Daytonas are extremely fun, but some of the most time-intensive, expensive, inaccurate, PITA to work on systems out there. When they work its cleanup on aisle everyone-on-the-field's pants, but they are just such a hassle. I dont put much stock in the ME systems like the Kythera, Reaper M, or Redline MilSim as I dont run many DMRs - though the option to forgo a battery entirely is awesome if you will never go auto. If I didnt always run LMG or SMG at MilSims Id probably have a few of these engines installed over the many FEs, F2s, and various W engines I do have. Now, since you didnt mention what gun I will go ahead and talk about the bolties. You have two main options - W and MC. W has the two Bolts, while MC has the sDiKs. Bolt is the older model that uses a battery, Bolt M is ME and doesnt use a battery. I have a Bolt in my VSR and its great. A real ninja converter of an engine, I can be audibly invisible 20 feet from a person with a good foam suppressor. The sDiKs are sorta like the Hydra to me - they are available for tons more oddball bolties, but I could never get the performance out of them, their installs are odd and have weird placement (like my MSR wanting the hose to go out the trigger?!), and they just seem clunkier than the Bolts. All in all I probably currently own some 25+ HPA guns of various makes and manufactures. Some notable ones are my Inferno PKM, FE 249, Daytona MG36, L85, and M27, Bolt VSR, Jack MP7, FE PP-91 (see the "Mosquito' thread on here), F2 L86, F2 AUG HBAR, and F2 G28LE/417A2. I am happy to say more about certain engines if you wish. You will also - regardless of what engine you get - need a good tank and regulator to run said gun. HPA is expensive to get into, but IMO needs far less effort to tune, and breaks far less than AEGs. That being said I keep a steady supply of HPA, AEG, and even spring guns in my collection, so I can use whatever happens to strike my fancy on a particular game day.

That's a transplant! 😆 The 1875 Act covers the possession of explosion with intent to endanger life or property, the 1923 Act is more concerned with general use and possession of explosives and pressure devices. Both are much amended, e.g. the 1875 Act covers explosives not available when first drafted. A mate was allowed to keep stocks of nitro powder in his shop (propellant) but not black powder (an explosive) because of the proximity of other businesses. In another LA area, a local shop is not permitted to keep MKV bangs in a retail unit in a shopping centre. I think that it's another area of fuzzy legislation much re-codified and much interpreted by many actors.

Well... I believe that ML do a non-rubber hop erm... rubber(?) for cold weather. TBH I have rifs refuse to hop in freezing temperatures, and fps has been way down. A quick burst of auto and you generate enough friction to heat it up sufficiently. Maybe a good idea to split the difference and fit a 60 deg. Plenty of people do!

Absolutely true, and they are a wonder to behold. But in my experience, that's the exception not the norm. I'm more than happy for people to bodge their TM's with upgrades as it means I'm less likely to get shot as I bimble around at a skirmish.

i just use some stuff i ordered from RS ages ago, came on 30m reels and still have loads of it sitting around. well, that and a box of assorted lengths of wire......