Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 29/04/21 in all areas

  1. Decided to give making a holster a go and blow off the old leather working tools. Bit rusty and rough around the edges as was thrown together to prove the design but I’m happy with it for a first attempt!
    3 points
  2. Not if I did it. Mr blobby has nothing on me when it comes to soldering! 🤭 Regards
    3 points
  3. AlphaBear

    THE TM MWS thread

    Don't get me ranting on about cheap BB's.... I won't go on about it..... Promise... Scout's Honour... Honest! Bloody Nuprol RZR shite BB's! This is my order... 1. G&G's - The only downside about G&G is that you can't get the heavier ammo grade in the UK... I'm not sure why but you just can't. 2. Geoff's - (Super Precision variant. Geoff's do both Super Precision and Precision https://www.outdoorandtactical.co.uk/product/geoffs-super-precision-bbs-0-32g-3000-white 3. Longbow 4. BLS 5. ASG Devil Blasters
    3 points
  4. My MWS.
    2 points
  5. Told ya, if he don't know it, prob not worth knowing👍
    2 points
  6. It's the same as any other mosfet, I have a better picture for the wiring tho. Cut on the red crosses. The 2 green wires become the trigger. You can solder the perun wires directly to them (polarity doesn't matter) The 2 blue wires are the motor wires, Polarity is important so pay attention. If you want sexy wires then you need to add in a set of deans between the mosfet and motor. You just about have space with a gate nanohard so the perun should work as well. The micro connector is also nice but not essential. When your done if you get the wires all nice and r
    2 points
  7. Albiscuit

    Price Bump

    Can I? Gee thanks
    2 points
  8. @Iceniis our resident Aug specialist, I'm sure he'll be able to sort you out, top bloke👍
    2 points
  9. First Assault Airsoft Project Im hoping to start collecting and making the weapons featured in this beloved shutdown game i used to play on soon. so i have a list of guns that i will want to acquire in the coming months. (http://www.imfdb.org/wiki/Ghost_In_The_Shell:_Stand_Alone_Complex_First_Assault) I currently own 3 weapons from this game. Those being the KSG-12, ARX-160 and MP7 though the MP7 isntt the best quality. that list currently is: Marushin Mateba SIG MPX Magpul Masada ACR (PTS) Daewoo K2 IWI X95-R CA MSG90
    2 points
  10. Old skool 'new old stock' ICS M4 Commando with Stubby Stock. So old, it still has (somewhat crappily implemented) Cybergun-Licensed Colt trades. It weighs practically nothing - I will be be keeping this one as light as possible.
    2 points
  11. Hi all, I have a G&G CM16 sr-l and would like to upgrade the spring to achieve a more consistent 340 - 350 FPS rather than the 290 - 300 FPS that I'm currently getting. I would really appreciate any guidance in which spring I should be buying to achieve the objective? Many thanks :-)
    1 point
  12. Hi guys im seeking some clarification regarding fitting a mosfet into an aug. Ive drawn up a crude diagram before fitting but id like to be 100%. Has anyone fitted the peun AB++ to an aug. Ive fitted seceral perun into a v2 gearboxes but the full auto bar on the aug has got me stumped a little. Ive included my diagram.
    1 point
  13. Hi @Zitch! 👋 Not a bad start at all! Like all things, got to start somewhere, get better along the way, with experience! 🔫😎👍 Might consider a custom job, know who I’ll be going to, no joke! 🤪👍 💷GAMBLE💷
    1 point
  14. Just another note - If you do go with the deans split you can solder the motor wires to the motor. It makes for a much better connection.
    1 point
  15. Druid799

    Gun picture thread

    Can totally appreciate the obvious build quality and tech work you’ve put in to it(it does looks really impressive) BUT my eyes almost bleed every time I see a classical ‘old school’ gun get modernised ! 😭 but like the fat lady said , “what ever floats ya boat ?” 😉👍
    1 point
  16. Yep fire support do them... They work on AEGs too. You don't necessarily need to use them, just some rails need them. Barrel Shims
    1 point
  17. #blackadder

    Gun picture thread

    Wasn’t aware someone made an upgraded P90 trigger - thanks for the info ! Just ordered one for myself . Can’t wait to try it.
    1 point
  18. SSPKali

    THE TM MWS thread

    I have been using the TM nozzle and had a DP one as a spare. I tested it the other day and found a slight FPS increase (I think it seats deeper in the bucking)....and then the back ripped off it! Mine was probably purchased 18mths ago and the spare from JKArmy (here in 5 days!) looks like a less shiny (less brittle?!) plastic. I need to give it a proper test but initial thoughts are the TM valve doesn't fit as it is a hair too large a diameter. The alloy DP one is fine. My TM nozzle has been giving inconsistent FPS (265, 266, 264, 150, 265...wait what?) and
    1 point
  19. ah ha! that's good, I had a Perun AB++ turn up yesterday for my AUG so I am also on the hunt for info on this! I did email perun but the images they sent me didn't overly help clear things up.
    1 point
  20. UFPro trousers in brown/grey and a pre order for a Daytona AK kit. Could be a few months until I actually get the kit tho, plenty of time to decide between a modern alpha style ak or old school rpk.
    1 point
  21. Like you I have an smg (mp9) on a single point and retention clip setup. The single point I use is the ops plate carrier sling, which I got from hueys. Its been really good, flexible setups and quick to release and shorten when needed. https://www.hueys.co.uk/epages/es151784.mobile/en_GB/?ObjectPath=/Shops/es151784/Products/"OPS PC Sling FG"&ViewAction=ViewProduct
    1 point
  22. Davegolf

    THE TM MWS thread

    i Havnt used this particular rail myself, maybe other owners have, but generally you need a PTS ring yes
    1 point
  23. Druid799

    Wosport G4 Mask Idea

    Don’t think it’s possible to do that it’s just way too bulky , only way your getting the visor any closer to your face is by either creating a whole new attachment system or ditching all the parts for that system and permanently attaching it to the helmet .
    1 point
  24. Davegolf

    THE TM MWS thread

    Covered only a few pages back; Genuine armourer wrench, not some cheesium one. Spare nozzle Spare nozzle return springs TechT GunSav Parker gun oil Mini screwdriver and pick set Long Allen keys upto 5mm (non of that ball hex crap ) HSB spacer is good for buffer longevity, shot consistency, faster cycle, and a little fps boost.
    1 point
  25. gunbod007

    THE TM MWS thread

    I have personally just done the sixG nub and haven't messed with any other internals. bearing in mind I am a noob to this but I am very happy so far.
    1 point
  26. I just bought ANOTHER Maxx hop unit And an AliExpress handguard for the PDW.
    1 point
  27. It's unlikely unfortunately due to work. Never been either, which is daft as I'm literally 5 mins away. Usually see a lot of the international guys at The Railway in Ringwood! Plan on being at GZ whenever I can and, if Camouflage works out, there as well.
    1 point
  28. Will you be at the nae this year? They are opening up the booking in June. Regards Was over your way today. Winkton, over Avon causeway on way to Kinson. Regards
    1 point
  29. have to say love this gun already XD only hitting around 380 so will find out at weekend if i need to bump its power up a little for my local fields *edit site has flipped the pic was the right way round i swear
    1 point
  30. South coast massive meet up in May then 😆 I'm over in Ringwood. Be good to have another site close by. Still mourning the loss of Combat South and hope the guys can get another site soon.
    1 point
  31. cropzy

    Gp Vltor

    G&P Vltor Wired to deans Lonex A5 motor Lonex/tomtac gearbox with micro trigger ASG millspec m105 spring Madbull python tbb SHS Red bucking Prowin hop unit Daniels Defense MFR 12.0 Rail Noveske Sound Hog Fiber flip up sights Magpul pistol grip
    1 point
  32. 1 point
  33. G&P Stoner 63 with chopped barrel and stock, rails and vfg bolted on acetech predator tracer perst 4 laser vortex crossfire 2 UT style high mount
    1 point
  34. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • As new

    Hey hi hello. Here is one design of a few railed outer barrel extensions I've been working on for the AAP-01 GBB airsoft pistol. This is a replacement for the original outer barrel and uses the same screws so make sure you have those hand. So recently I've had a bit of a personal dilemma. I've always wanted to experiment with a DMR kit/extension but I've always hated the most common ones out there. Their pseudo-futuristic-frankenstein appearance just really doesn't do it for me and I love my AAP-01 far too much to taint it that way. What I do like however is Big. Chonky. Hand Cannons. Especially the Desert Eagle. Which is where I got the idea for this design. I wanted something sleak enough to serve as a standalone pistol but long enough for a potential DMR loadout whenever I felt like slapping a stock and a foregrip on without it looking like some rejected Battlefield 4 concept art or just a simple afterthought. My crap patter aside here's a look at the unit itself: - This replaces the pistol's default outer barrel so make sure you're familiar with how to remove and replace that first. (Its not difficult, its just a two different types of hex head screws). - Outer barrel length is approximately 178mm in length. (it fits the official Action Army 200mm inner barrel with a bit of room to spare.) - Outer barrel width is 30mm. - The top rail is about 235mm in length - The bottom rail is around 169mm in length. - Printed in PLA at 50% infill. Sturdy but not unbreakable. Its not CNC Steel so don't go treating it like it is. - Lightweight at approximately 180g (according to filament used in Simplify3D) PLEASE NOTE THE FOLLOWING BEFORE YOU BUY: These are made to order. I will always try to get UK orders sent out first but as I have this listed on more international sites I get a lot of attraction from yankee airsofters across the pond which clogs up my work load. Please allow for 4-7 days production but if its urgent feel free to drop me a message prior and I'll see what I can do. The stand out bit of the top rail is a weak point due to it's dimensions and will most likely break if mishandled or dropped especially if you have a large optic mounted there. If it does snap off the barrel can still be secured without that top screw mounting point and I'm actually going to list a version without the sticky-outy top rail in the future because it can be paired with the official Action Army AAP-01 top rail and secured together with the optic's mount or a rail riser for a full front-to-back top rail. The sloped end of the muzzle has an imperfect finish which is unfortunately unavoidable due to the way it has to be printed with supports but I know it can be done better so I'm always looking into ways to lessen its ugliness. I've tried to show this in one of the images. The best fix for this is to sand it down gently with some 300-500 grit sandpaper then buff it out and repaint it. I'd advise painting it to match your AAP-01's top slide/receiver portion anyway for a nice uniform look. If you have any questions at all feel free to ask Feel free to check out my lacklustre facebook page; https://www.facebook.com/VonGrimmArmoury (If social media links aren't allowed just give me a slap and I'll remove it)

    £24

    Rotherham, South Yorkshire - GB

    1 point
  35. You have two choices when it comes to radios for Airsoft purposes and they each have their pros and cons. You can either use a PMR 446 or a licensed radio such as a Baofeng. PMR 446 Comes in two types, analogue which has 8 channels and digital which is 16 channel. Most people use analogue as digital is still expensive. Is unlicensed so you can just buy a radio and it will work with all other PMR 446 radios. It is limited to 0.5W. It is lower range and penetration than a licensed radio. In thick woodland expect below 100m sometimes you can shout further. In open ground i
    1 point
  36. My worst one seems mild to all of these. I was charging a position and took a BB right in the gob, hit the back of my throat and had me gagging and coughing all day after. Made eating and drinking a pain for a few days after. Now always have face pro as dont want that experience again.
    0 points
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...