Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 16/09/20 in all areas

  1. MandalShArK

    Gun picture thread

    Externally my AUG is now how I want it. Asside from changing the barrel to a longer one every now and again and the 9mm adaptor I have.. New Rail for my AUG from 3D crafts. Based on the one used by Kalid in Rainbow 6 Siege. (I have the 9mm conversation too just not with me) Parts list.. ASG gearbox (330fps) JG body Custom 16 inch barrel PTS flash hider. Platatac F88/AUG stock mag pouch (rare) 3D printed front tail Valken grip FMA mini Peq Guarder Aimpoint and mount. Rail sling mount FRV tailoring Sling ASG Scorpion EVO sights I have a clone scout light for the front too.
    6 points
  2. L3wisD

    Gun picture thread

    My TM USP with its new XC1 Torch 😎
    5 points
  3. MILITATED

    Gun picture thread

    Here is the most recent update of my TM MTR16 GBB. Still need another optic & need to change the foregrip (the KWA Vector one is all I have), but I love it! Can't really see the carbon fibre outer barrel, but it is there 😉
    3 points
  4. If Sim can un-ban me from UKAC I'll mention this to my buddy at The UKARA Police and they'll send the heavies in
    3 points
  5. He lifts his foot and carefully places it right on the gun. Maybe he has super-sonic sonar radar equipped boots. That. One foot could be accidental. Both is enemy action.
    2 points
  6. I have one. Played on an event with it once, so far I like it very much. Some parts of it are made of cheese. The screws for example and only after less than 100 rounds there was the big dent on the thing the hammer hits. Gluing a small rubber there is a must. Mine shoots very nice with the stock parts after a cleanup. Easy 70m torso hits on the test range. My Hi-capa couldn't reach it, only 65m. I'm trying to make it quieter with various methods. It's in progress.
    2 points
  7. Cant say i'm sold on that The ground is brown rather than green and it looks like the fella detoured specifically to stand on it. Plus the foot placement is too careful.
    2 points
  8. When someone asks "Which Glock should I get?" there's always one bloke who's beaten his stock WE to hell for a decade and it's still going strong, then another whose arrived broken.
    2 points
  9. Teeth and bite marks and love bites happen all the time when you go away for a days airsoft. #justsayingwhatamatesaid
    2 points
  10. DMR envy. I'd urge people not to propagate this. The rogue has been identified and the issue is with the site. I'm not surprised to note that this seems to have been missed in the middle of the rage-fest. At this point, it's clickbait. There is nothing constructive to be gained from promoting it. If the ID was wrong or site doesn't deal with it, that's a different matter.
    2 points
  11. Judging by the fact that he's got a bolt action it doesn't look like a random rental. Definitely a ban. The sort of bunglecunt that would push over a motorbike or jump on a car for fun.
    2 points
  12. Stopped watching (and following) half of the airsoft channels because of that.
    2 points
  13. @Jaylordofwaargh I think this video says it all. A measured 22 yards.
    2 points
  14. Any USB charger will do as long as it has a sufficiently high Ma rating That's the balance charger port for the lipo's as is for charging and measuring individual cells. the other connector is for discharging and is connected across the full pack Unless it says Nuprol on it anywhere the charger is fine for 1 battery, but you will need more than 1 battery for a days play Packet of 50 bb's in with the gun, always go straight into bin as they are rubbish, so no loss
    2 points
  15. Firstly I would like to point out that your post reads like a complaint email to us, rather than a polite request for advice. Secondly as pointed out above you haven't provided enough details. I used to work for DHL (the freight forwarding side, not courier) and it always used to amaze me that customers would constantly moan at us about decisions and delays made by the local customs authority. I ordered a drum magazine from evike and in addition to the massive delay in it arriving in the country, it took over a month to even be looked at by customs.
    2 points
  16. GDOG-AIRSOFT

    Gdog-airsoft

    Hi guys/gals hope all is well here is the link to my channel i play mostly north of the uk South Yorkshire area but am always willing to try new fields so feel free to send me any links to any sites you guys/gals recommend and I’ll make a trip down hopefully you guys/gals will take a look and leave a subscribe https://www.youtube.com/channel/UCBStHd9hh7gJ1f4U1L-JzdA cheers guys all the best 🔫🔫🔥🔥
    1 point
  17. You may want to try Hammerite Satin Black Metal spray paint that replicate enamel paint the Soviets/Russian use on their AKs. As they only blued the type 3 AK 47, then switch to a glossy enamel paint for the AKM onwards because it was cheaper and quicker. There is also Voron Original Soviet Weapon Finish but that is expensive and a bit more time consuming to apply.
    1 point
  18. Its not too bad but yeah, the hard part of wearing is to know when to stop 😉 Could try bluing. You'll need different stuff for aluminium and steel but both are quite expensive. Easiest and cheapest would be to spray it again.
    1 point
  19. GDOG-AIRSOFT

    Gdog-airsoft

    No problem mate I’d like to aim for both the viewers 😂😂😂😂
    1 point
  20. I play in Brazil, in a facility that is used for training cops and military personnel... when I say no rules, I mean the fps is not regulated, they say assault rifles not over 400 fps, but most guys stretch it a little or even a lot. You are right, but I live in Brazil, not Portugal I play mostly CQB
    1 point
  21. Don't cha just hate it when 7" is deemed 'slightly too short'... I blame the internet. Looks like a tidy job on the other though 👌
    1 point
  22. alxndrhll

    Torquing nuts (!)

    Agree with everything said so far, just remember this very valuable question... "Will I ever be able to undo this without potentially breaking something?". If you suspect the answer is ever anything other than 'yes', stop. Out of curiousity, are you using an AR block or similar to hold everything in place?
    1 point
  23. Isn't that a Steven Seagal film? Come to think of it, I think Deliberate Damage is too!
    1 point
  24. MILITATED

    Gun picture thread

    I suddenly have a major need for a USP with XC1 🤯
    1 point
  25. leadly

    The AAP-01 Owners Thread.

    I intend on buying one should they come back in to stock anytime soon!
    1 point
  26. Tommikka

    Torquing nuts (!)

    If you want to be sure it’s not going to work loose then a drop of light duty threadlocker will hold it in place. Be careful what strength is used as high strength thread lock needs heat and brute force to release, mid strength needs brute force and low strength needs some force. Something like Loctite 222 will give a low strength fix
    1 point
  27. Could be, but the sound and feel of plastic bending under your feet is rather clear.
    1 point
  28. Might hit up Skirmish again this Sunday. Anyone want to join? @Barny @GAMBLE @Badger @EDcase
    1 point
  29. Chap has a Portuguese username and Portugal has a fair few no-rules sites.
    1 point
  30. You sure its not bottoming out? If its not just keep taking it off and on again cleaning and lubing the threads as you go. I would not like to guess at how much torque the thread could take without knowing the composite of the alu and how deep the threads are cut.
    1 point
  31. Wonkey's Chinese in London was/is famous for this about 20 years ago There's no place in this sport for people like that in the video, should be ashamed of himself.
    1 point
  32. Yeah...that's the same as what I said. Maybe take it back to the AAP-01 thread. We're the the only two members, so it's basically a PM 😄
    1 point
  33. This was something I was contemplating myself earlier actually. For all intents and purposes they are the same width, with each "Compartment" being the same. But the SMG inserts being open at the bottom allow the smg mags to sit further down into the pouch. I've got two of the Pistol mag inserts and they're good - retention is tight on the mag without being annoying and you can sit the insert down into the pouch quite far so only the baseplate sits proud of the pouch itself. Wouldn't worry about them falling out.
    1 point
  34. Definitely agree with @Rogerborg on this one. It's best to leave it for the site to deal with and avoid turning this into another piece of clickbait. On a side note, while they are a hindrance at times, I would strongly recommend that your friend invests in a sling for his M14 @Lozart so that he can keep it with him under more conditions. I'd also advise standing it up against stuff where it is unlikely to fall over so that it is less likely to be kicked/trodden on. While I don't think it is the case in this instance, a lot of face protection limits the player's field of vision more than people realise and as such their awareness drops massively. There will always be occasions where you'll want to put down a piece of kit but sadly there are a lot of people in this world who are malicious simply for the sake of it. I suspect that it would be worth your friends time and/or money to have his M14 broken down, inspected and serviced. Even if it is just for peace of mind.
    1 point
  35. I’ve been eyeing up one of ‘Utility Rigs’ for a while as a cheaper option to throw a bunch of fake leaves and other random assorted shite onto with Shoe Goo (loved the D3CRM and Flatpack combo, didn’t have the heart to deface it). Don’t suppose you know how well the SMG inserts would work for pistol mag retention? The only thing that’s been putting me off is how shallow the pistol mag inserts seem to be, it’s weird that they’ve stitched the bottom... though I guess picking that stitching is another option to have them sit a bit deeper.
    1 point
  36. Largely the same when it comes to previews/reviews/first impressions. Though not solely due the legitimacy of the opinions give... which leads me nicely to one of the more frustrating fallacies. That good, consistent QC exists within RIF manufacturing. Just because the fella on the internet got a good one, doesn’t mean you will.
    1 point
  37. General tip for any spiritus and associated clone rigs; put whatever you're gonna carry in to the insert beforehand as mentioned, whether it's 556 mags, SMG, whatever, then kinda bend it in to a curve and push it in. Only the convex side of the velcro will try and stick on the way down and you can just slide a piece of paper/your hand/your Trojan Magnums in there to stop it adhering before the insert is fully home. After 1 or 2 goes you can swap loadouts in seconds.
    1 point
  38. The USB connector has some LED's in the plug, so it's red and flashing green for charging, and just fully green for fully charged. I guess the thing cuts out when charged. The documentation advises a charger plug rating of 1-2A, and to use the charging cable until the LED's tell you to stop. Charging time is supposed to be one hour. I have another charger bank that's rated at 2A, and the phone charger plug I'm using is rated at 1A. I'll try the lower output bank first. Seems a good solution for field charging from a bank. I may look at the S65 charger, seems a good choice. I just wanted an intro gun, and because I have no UKARA yet it's a two-tone. I'm still pretty much in isolation as I'm a vulnerable person, so plinking in the garden for a few months until I try some events, have a try on some rental and other players guns, and decide what proper ones to get. 👍 Without any experience at the moment I'm looking at AEP for those as well, or spring sniper for outdoors. Gas is cool, but seems a lot of expense, more failures, and extra maintenance, but I'll keep assessing. The SSP18 does look interesting though. 😎
    1 point
  39. Halloween is right around the corner. Full-auto pumpkin carving!
    1 point
  40. Er, the video says that the cuntspangle has already been identified and the site is aware of it. If it's a positive ID, I'd be wanting that passed around to every other site in the galaxy, although hopefully Dogtag will take care of that too.
    1 point
  41. have you looked at soldier of fortune? they seem to have a couple of sten parts for sale including skeleton stocks. given that the northeast sten is made to the same dimensions as the real steel, these should fit... https://www.sofmilitary.co.uk/sten-gun-no3-mk1-skeleton-stock.html https://www.sofmilitary.co.uk/skeleton-rear-pistol-grip-for-sten-gun.html as for anti corrosion, i havent added anything to the gun myself, and i dont believe the previous owner did either, and while i havent noticed any rust forming on it,i am looking into what anti corrosion products would be suitable i only got the sten a couple of weeks ago from the classifieds here, and havent skirmished it yet as i need to get more mags and suitable mag pouches for the 37 pattern webbing
    1 point
  42. Seconded. Has the footage been shown to the guys who run the site?
    1 point
  43. He's not been back since he posted this, something a bit fishy methinks 🐟🐠🐡
    1 point
  44. While I've never gone to a site, cqb or otherwise, with the sole intention of going "pistol only", I've played a few where the organisers have said "right chaps, next games just pistols", & it's brilliant, a real hoot, & it's surprising how many people can't shoot for shit when it comes to pistols🤣, it's a real leveler. Also great fun is "single shot guns only" games, so sniper/dmr with a med, shotguns & pistols, always a giggle to throw one of those in to the middle of a game day, turns things on it's a head a little 😁 (Although when it was announced at one game day I remember seeing a couple of "operators" quickly removing their holsters, hiding them & pleading that they didn't have pistols, wankers lol)
    1 point
  45. It's not cheap, but I use Meguiars PlastX, which is specifically designed for use on polycarbonate. As always, results not guaranteed, test on an inconspicuous area, will probably give you eye cancer.
    1 point
  46. Oooops I did it again. I bought another recoil. Marui AK Storm.
    1 point
  47. 1 point
  48. Shamal

    Hiya

    Wow! Well spotted! Hi Sim and welcome to the mad house.🤪
    1 point
×
×
  • Create New...