Leaderboard

Beware of PM from Mrs Janet Crews wanting to buy guns - new member flagged as a scammer.

As a lot of threads end up with one of us recommending the Tokyo Marui MWS, and i get PM's asking about it, i figured I'd start a thread to keep all of the information in one place. Here i plan on covering a general overview of the gun, as well as upgrade parts, general maintenance and tuning. If anyone else wants to share any information, guides or even gameplay with their MWS, here is the place to do it. With that being said, lets get on with it. I've had my 2 Tm m4 GBBR's for a little over a year now, and they've got through dozens of changes to get them where they are today. Out of the box they are beautifully finished and boast impressive performance. I bought my first one from Zeroone, who price matched it for me. At the time the gun set me back £430 and the magazines £35, but they have risen quite a bit in price in most places. The gun is incredibly well finished and sports a Cerakoted receiver. Before opening the box, i didn't get what the big deal was about Cerakote, but that all changed after using it over time. The finish is VERY resistant to the hard life I've shown it, and is far more scratch resistant than any paint or anodization on any other gun I've owned. The two I have still don't have a scratch on them. At the rear is a standard m4 stock, which does its job with little wobble, but isn't the nicest one I've ever seen. The railed handguard is very solid and nicely finished with all of the correct numbered markings on the rails. From there you have your usual front triangle iron sight which DOES NOT have a sling attachment at the base. The magazines hold 35 BB's and have a Cerakoted shell to keep them from scratching easily. They have very recently started coming with silent fill valves, but are mostly the normal kind that hiss when filling and spray liquid propane when full. Its worth noting that the valve sits at an angle to the baseplate. One modification i would highly recommend to do is the "green gas mod" which involves removing a long zinc tube from inside the magazine. This allows more gas into the magazine and upping your shots per gas fill dramatically, with some people reporting 150+ shots from a single gas charge. As a side note, i have started to just cut the zinc tube about 1 inch from the base instead of removing it entirely. A video showing how to do it: Chronograph Results: using blaster .20 BB's and green gas i got around 298 fps with a deviation of 2FPS. yes, you heard that right, " FPS. This thing is incredibly consistent! Important information: The inner barrel is 250mm on the 10.5 " CQBR and the 14.5" carbine, meaning on the 14.5" outer you can fit a much longer 370mm inner barrel. The Hop up adjustment dial is similar to Tm pistols and can be located inside the upper receiver by locking the bolt back and looking down the magwell. Due to the way the outer barrel is cut, it's not possible to fit an aftermarket rail onto the gun without one of two things. A barrel adapter ring (PTS, ORGA and a couple of others make them and usually cost £10) or A dytac outer barrel, which has a wider lip, as shown below. Dytac on the left First shots: I took it down to the 20m range at the First and only shop and loaded it up with .28 blaster devils. They had multiple targets there, but i focused on the little spinning targets at the back wall. The orange discs must have been no more than 1.5 inches in diameter and i was hitting it virtually every time with the iron sights. So far, very impressed with the accuracy. So much so, I treated it to a new dress! First internal upgrades: After speaking with Dave about the gun, he explained that the gun wouldnt hop really heavy weight BB's with the standard nub. because it was hollow and squished when applying hop pressure. To remedy this he machined me a great little nub out of brass. Isn't it beautiful!? This meant i could now lift much heavier BB's increasing my range and accuracy even further than the already impressive stock performance. Using this new nub and GEOFF .32 bb''s i was able to get the bb's out 60+M with a flat trajectory. They were making a 1.5-2ft grouping on the plastic bales as seen in the video below. I have SOOO much move to cover, including barrel reviews, customs mods and a DMR build, but its 5;30 am and i need to be up in an hour, so we'll continue this tomorrow

If you need any repairs, downgrade or modification work done in or around the Reading area just pop me an email or FB message. YouTube Negative Airsoft Facebook Negative Airsoft Email [email protected] I work on the basis that you don't need to spend a fortune nor have every upgrade to have an amazing gun. All work is recorded as there are people out there that will do a shit job of your gun & also people out there who think they can get a free lunch out of a tech & the best ones I put on my YouTube channel. Here's a link to my YouTube channel content (I'm the c*nt that made that NGRS video ), have a browse through to get a feel for what I do. Luke

after all those years and getting masks to fit helmet straps.....this! Link to Amazon

no more fighting tooth and nail with the crappy xl burst grenade. Nope as of today pappa has a brand new toy. Dynatex timed bfg with some 9mm blanks. Also now have some Leo Kholer atacs ix trousers and a ubacs enroute to me too.

I am ready for my first upgrade... Wish me luck

GHK AK105 - I got a few cans of paint so naturally I sprayed everything I could It just needs a lot of wear and then it'll be perfect!

Just put some tan on it , either do solid blocks of tan in the the side panels or scrim net and light passes for the ‘snake skin’ look .

Blud, that's harsh, cant ya cut my bredwin some slack, ya get me doh 😜

It was good... until I read who did the upgrades... avoid like the fooking plague.