Leaderboard

His only two interactions on the forum was to suggest a Tippmann on a GBB thread. Guess the schools out again? 🙄

What about red go faster stripes on the bb's? Will they make market stall springers break legal limits?

I resent that remark, I'm a butcher & will not tollerate any slight towards sausages.

A. Not a GBB. B. The company doesn't exist any more. C. They're not reliable and parts don't exist any more as per point B.

More colours more better?

custom gbb workshop colt m605b with xm148 vfc system airsoft detail fix

Hi all been in various forums over the years and recently got into air soft. Hoping pick up some great knowledge and experience from the others.

Clearly Bill buttered him up for you. What did you buy? 👀

Wait, you're meant to actually look where you're shooting? Laughs in blind-fire (For best results, shout "Get some!" while shooting.)

Just adjust hop to get best flight, there's no point in dialling it for max FPS as you're likely to either have BB's dropping or flying up into space.

Wait, you’re meant to actually shoot straight…? laughs in 7000 rounds

I run gas, so I set the hop to just slightly overhop at the end, then tweak the NPAS to the right power. Then pick a distance and zero my sights to it.

That is a very imaginative username.

He can delete whatever he likes, the original posts are still visible in quotes 😁

Visited Airsoftworld in Fife today... TM UGR-I aeg NE Uzi The Uzi is a bucket list item & always wanted it with a wooden stock, the UGR-I was a 'tism' thing, with AR15/M16 collection with gaps it became a want/need to have one, I was going to get the GBBR as TM seems to be a must for a GBBR but I preferred the longer barrel & gas mags are expensive & heavy. Now I need to buy a battery for it... If you read or remember my post about haggling, the plan was to ask for a deal on a gas URG-I, M16A2 & the Uzi but what I was willing to pay would certainly be too low & a bit cheeky so I opted for these two today & maybe the M16A2 next month. Besides, I have an S&T BAR on it's way soon from Austeyr & I couldn't post any pics without the typical above the radiator pic too.

Literally today.

TM Beretta M9A1 is worth about £60 and the KJ works Glock 19/23 is around the same.

Have had to resort to Brownells as no one in the UK has them in stock, so bought another pack of Magpul Gen M3 AR/M4 Ranger plates. Also bought 2 packs of Federal Concepts mag locks, so I can install the ranger plates on the GM PMags without the shell yeeting the internals.

Wanted to make my WE Scar H mags look kinda like Lancer L7AWM’s - found a guy on Reddit who had previously talked about working on one, and got involved with testing it (and suggesting changes/improvements). After about 50 hours total of printing I’ve now got 7 of these done successfully.

A quick look on the website and it's all stuff that's easily available on AliExpress. Combined with the lack of any kind of contact details is very off-putting.

Definitely great pictures. @Tackle, I'll see your Turd and raise you. If I wear my chest rig and battle belt at the same time I look like sausages...

Just for clarification, neither of my Ossi rifles are for sale :).

Legal implications: This would be considered as illegally converting a firearm, and no defense will cover this in any shape nor form.

Regardless of what happens, you've got to factor at a bare minimum 4 mags into the equation, you cannot run on a single mag, you'll be in games for maybe 2 minutes. WE G36's are solid, you can usually get them with an NPAS and a few mags for well under £300 - the mags are really cheap as well compared to just about anything else. These are budget guns, so performance will be satisfactory, but you're not getting any form of laser beam out of the box. Double Eagle N4's that are UK spec really need a lot of work to be usable - Minimum to work is replacement nozzle (usually guns modify), replacement hop bucking (most suggest Sniper Mechanics Flamingo, but they're fragile as fuck), Replacement inner barrel to run to the end of the muzzle - UK spec ones come with a 180mm barrel in a space big enough for a 250mm to fudge under UK limits, then an NPAS either Jaeger or Federal Concepts. By the time someone has done all of that, then decided to sell it on, you're basically paying £300 used with a single mag, and you can't run them on a single mag. Do not buy Cyma Gas System - they keep getting labelled as MWS by retailers who don't give a shit, they're not, they're at most 30% MWS - where that becomes a problem, decent spares are non-existent and the ones that do exist are craptastic and overpriced.

Nah that's a bendy yellow fruit

I think the ads are telling me to off my nan

Not for long

looks like same guy on Airsoft Hub Already reported https://www.airsoft-hub.com/item/40047-premium-mystery-airsoft-cache

The DE mosfet is a very similar dual board design similar to a GATE Titan so they drop right in. Unfortunately, the Perun gets stuck on a little nub on the left-shell of the gearbox which requires a bit of fitment work. See Herrgh's posts: Dremel arrived just earlier. It's going to be a very painful couple of days (not helped by the fact I've got a fracture in my wrist!) UPDATE: Will be tomorrow instead - turns out the set of 15 accessories didn't include a metal die-grinder small enough to get at the peg without blasting half the gearbox. Did end up using the dremel to make my selector fit and able to move with the EZO bearings however. Overshimmed the shit out of it so they were as pushed out as they're ever going to be & took off enough until it selected smooth, job's a gooden.

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

Finally we can all complete our Gloria from lock stock and two smoking barrels loadout! 😎

Ol' Reliable right here