Technician1

stubby killer m4 upgrade

6 posts in this topic

HELP

 

This is doing my head in now with the amount we have thrown at the gun

 

Gearbox has all ultimate parts

 

spring guide

Cylinder

Piston

Cylinder head

madbull m110 spring

 

We built the gearbox and added tightbore barrel and one piece hop

 

Fps around 280 ish

 

Remove the front of the gun and replace with a tightbore barrel and hop from another m4 that fires at 370 fps, and the fps on the stubby raises to360 fps (long barrel)

 

This points to an airseal problem around the hop, but all parts are the same apart from barrel lengths

 

My question is this

 

How can I upgrade to around the 340 fps on the stubby with such a small barrel.

Do I have to increase spring and bore upthe cylinder

 

Any answers greatful

 

Paul

 

Or

Share this post


Link to post
Share on other sites

Assuming the two hop units are also identical, so it can't be different dimensions effecting things I'd say it's the hop rubber in your new barrel. You might not have installed it 100% correctly - it could have gotten moved/pinched when you reassembled the hop. Take the hop unit apart and reinstall, try a different hop rubber if possible.

Share this post


Link to post
Share on other sites

I think it`s only going up because of the length of the inner barrel so yes a spring upgrade is necessary as i think a barrel will only add 2 or maybe 10 FPS per inch depending on how tight it is and try cleaning and lubing it all up and also the gearbox will need Greasing NOT Lubing

Share this post


Link to post
Share on other sites
I think it`s only going up because of the length of the inner barrel so yes a spring upgrade is necessary as i think a barrel will only add 2 or maybe 10 FPS per inch depending on how tight it is and try cleaning and lubing it all up and also the gearbox will need Greasing NOT Lubing

 

 

its my agm stubby hes on about lol it has a 6.03 barrel in it and a m110 spring fitted i will check the hop rubber and make sure its in right but it is a new one

Share this post


Link to post
Share on other sites

The cylinder will need changing if you are using aren't using the stock one designed for that barrel length. Different porting sizes effect FPS with specific barrels.

Share this post


Link to post
Share on other sites
The cylinder will need changing if you are using aren't using the stock one designed for that barrel length. Different porting sizes effect FPS with specific barrels.

 

been done plus cylinder head

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now