Cameron364

The 'What have you just bought' Thread

7629 posts in this topic

 

What made you go for the Orgas over the RATech inner and Outer Barrel setup?

 

Because the only place a Ratech inner should be installed is the bin. Literally the biggest cause of jam's in "upgraded" WE GBBR's.

 

The Ratech carrier was only bought until the guy making the 3D printed ones gets his act together and starts letting people buy them easily >.<

Share this post


Link to post
Share on other sites

Well, my wallet is crying bloody murder... Dropped over 3 grand in the last week... On quasi-Airsoft stuff...

 

Building a 3D modeling computer (I guess I can make better Airsoft videos with it 😉)

 

Ended up being more like $1700 with shipping (pic below)

 

Then I splooged and got myself a 3DR SOLO quadrotor.

 

A guy I know used a drone to film a game I was at here in the states, so I needed to be able to do the same 😊

Ian_Gere and Randymanpipe like this

Share this post


Link to post
Share on other sites

Well at least Newegg is decent in the States.

True, but this isn't newegg... But I did get a few parts through them.

Share this post


Link to post
Share on other sites

Finally got that PSO-1 from deal extreme £65 all in :D

 

Now if I could only get the bugger to fit lol

 

Edit :- had to file some bits, but fits like a glove now

Ian_Gere and PT247 like this

Share this post


Link to post
Share on other sites

Was pay day yesterday so I had a little airsoft spending frenzy:

 

- Heroshark Daggernose mesh goggles.

- x2 TM Glock 17 magazines.

- x2 M4 hi-cap magazines.

- Speed loader.

- Warrior patches.

- Warrior triple velcro M4 magazine pouch.

- Warrior small horizontal utility pouch.

^_^

Also going to purchase a division six black multicam mesh mask once they're back in stock.

 

Share this post


Link to post
Share on other sites

Jeez, here I go again.

 

M140 spring

Steel cylinder head

Steel cylinder

Steel barrel + hop up housing

6-24x50 Scope (current scope doesn't zoom or adjust, which is a completely pointless.)

 

Also nabbed from ebay:

Heroshark speartooth goggles for £17.50

1000 BBKing .45g BB's for £13.99

Ian_Gere likes this

Share this post


Link to post
Share on other sites

dsc_0057.jpgE&L AK 74 mid cap mag (brown) - €8.90

dsc_0051.jpg2 x E&L AK 74 mid cap mag (black) - €17.80

el-a104-g2_2_1.jpgMeister Arms AKS 74UN - €189.90

+€19.90 Shipping -€50 Voucher = €186.49 (£135.38) from airsoft-entrepot.fr

The voucher was going to run out on Monday, so something had to be done - I was hoping to spend the whole €50 on mags, despite their poor rep, because at least i can use the guts of them to fill some real steel (actually bakelite) mags I bought a while ago, but despite having only just restocked, they only had these 3 left. Hey ho, Phatima, my ICS AKS 74U, has got something dire wrong with her and although she was at one time my fav gun, my patience is very nearly expended, hence this new toy. Plus it was the cheapest Meister Arms gun they do...

Zak Da Mack and MrMcG like this

Share this post


Link to post
Share on other sites

Got some of the boring stuff out of the way;

 

-2 WE 7.4 Lippos

-Smart charger

-Spare G17 mag

-And a green shermagh thing.

 

Thinking about grabbing a single point sling next, anyone have any suggestions brand-wise for them?

Share this post


Link to post
Share on other sites

Got some of the boring stuff out of the way;

 

-2 WE 7.4 Lippos

-Smart charger

-Spare G17 mag

-And a green shermagh thing.

 

Thinking about grabbing a single point sling next, anyone have any suggestions brand-wise for them?

Let me get lynched again. I use the Safariland single point. I'll link it below. The quick detach is excellent.

 

 

www.safariland.com gun-accessories

BlackBlur likes this

Share this post


Link to post
Share on other sites

Bought a madbull Daniel defence block 2 rail(and suitable barrel) for my spare M4 only to realise I need to buy a G&P barrel nut. :@

Share this post


Link to post
Share on other sites

Just bought a GoPro Hero4 black addition for themes for xmas so she can record her airsoft escapades 😂😂

Monty likes this

Share this post


Link to post
Share on other sites

Got some of the boring stuff out of the way;

 

-2 WE 7.4 Lippos

-Smart charger

-Spare G17 mag

-And a green shermagh thing.

 

Thinking about grabbing a single point sling next, anyone have any suggestions brand-wise for them?

 

Sorry bud, messed up the link as I posted it from my tablet. Here's a real link :)

 

http://www.holsterops.com/Single-Point-M4-Rifle-Harness

 

Please note, this will work on all AR buffer tubes, or anything with a sling mount

Share this post


Link to post
Share on other sites

I'd be extraordinarily surprised if that fitted correctly on even 25% of airsoft buffer tubes.

Well seeing as Spaz has some connection with the Rogers company he can test it.

For all anybody knows they built enough tolerance into it for that. They do seem to aim towards the airsoft community as well as RS.

SeniorSpaz87 likes this

Share this post


Link to post
Share on other sites

You can't guarantee that. RS buffer tubes are consistent in their diameter for the mounting of the base plate, airsoft buffer tubes vary in size wildly between manufacturers.

I'd be extraordinarily surprised if that fitted correctly on even 25% of airsoft buffer tubes.

 

Well seeing as Spaz has some connection with the Rogers company he can test it.

For all anybody knows they built enough tolerance into it for that. They do seem to aim towards the airsoft community as well as RS.

Fair enough, let me rephrase :). RHC has tested it on (afaik) all AR tubes. I have tested it on WE, G&G, TM, KWA, VFC, and maybe a few more; it fits all them. It also comes with a shim to convert it to fit thinner tubes (real steel called civi tubes). Plus, you can just attach it to any sling mount; I have this sling on my TM MP7, S&T TAR, ARES Stoner, and my E&L AK, none of which have buffer tubes.

Jedi_Master likes this

Share this post


Link to post
Share on other sites

How does it adapt to the variance? All my airsoft ARs vary significantly in the sizing of their buffer tubes; a stock that's tight on a TM will wobble like crazy on an Avalon/VFC.

 

I'm also unsure why you'd need a shim for commercial spec buffer tubes? Mil spec tubes are the thinner ones.

 

15wckzo.jpg

 

And is there a site selling them that ships outside the US? Or do you have to contact HolsterOps directly? Attempting to go through their checkout, they don't allow any country but US to be selected for the address.

Share this post


Link to post
Share on other sites

Some nylon shoelace for like 50c. Made some mag pulls because I found myself throwing my gloves off to reload too often.

 

Used glue because drilling volatile plastic without a bench drill sounds like an awful idea to me.

 

https://imgur.com/ILL0gDF

PT247 likes this

Share this post


Link to post
Share on other sites

Some nylon shoelace for like 50c. Made some mag pulls because I found myself throwing my gloves off to reload too often.

 

Used glue because drilling volatile plastic without a bench drill sounds like an awful idea to me.

 

https://imgur.com/ILL0gDF

Ha, nice. I've never owned a VSR but I shot a buddy's many times, mags were always a plain. Might send him that picture actually.

Share this post


Link to post
Share on other sites

Yep,had the idea to do it from the asf but never bothered since my mags always dropped out nicely. Now they don't due to wear I guess.

 

If I had the time,patience and a non blunt drill bit,I would deffo recommend drilling and looping paracord. I had to melt the nylon lace ends to a 'plastic' form,then lightly sand the mag indent to actually bond it properly because otherwise it came off with a little bit of force.

Share this post


Link to post
Share on other sites

How does it adapt to the variance? All my airsoft ARs vary significantly in the sizing of their buffer tubes; a stock that's tight on a TM will wobble like crazy on an Avalon/VFC.

 

I'm also unsure why you'd need a shim for commercial spec buffer tubes? Mil spec tubes are the thinner ones.

 

15wckzo.jpg

 

And is there a site selling them that ships outside the US? Or do you have to contact HolsterOps directly? Attempting to go through their checkout, they don't allow any country but US to be selected for the address.

Sorry, mixed up civi and mil spec sizes, you are correct. Let me do some research real quick; worst comes to worst I can always bring some over (as I live in the states and have connections to RHC and Safariland.

Share this post


Link to post
Share on other sites

MkIV Osprey, just the vest.
MTP Universal pistol holster with mag pouch
WE Tech 886 Tan.


Slowly getting ready to airsoft in the new year!

Monty likes this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now