Cameron364

The 'What have you just bought' Thread

7629 posts in this topic

Yeah, me too. I'm not sure if it is down to battery failure or what but i was getting some very dodgy readings from my X3200 the last time i used it a few months ago... so much so that i just don't trust the thing anymore.

 

 

I find mine is quite particular about ambient light levels.

Ian_Gere likes this

Share this post


Link to post
Share on other sites

 

 

I find mine is quite particular about ambient light levels.

 

I take mine out to dinner & a movie now & then

but not bought it flowers for a while but I do try to let her know how special she is

 

(missus does get jealous though)

normally shooting outside in daylight is whre I chrono - soz for being silly once more

Ian_Gere, Sacarathe, Aengus and 1 other like this

Share this post


Link to post
Share on other sites

Neoprene thermal insulated hydration bladder tube cover (Get rid of the shiny green colour my hydration pack came with!)

£2.95 - Free P&P

http://www.ebay.co.uk/itm/281097155111?_trksid=p2057872.m2749.l2649&var=580334671481&ssPageName=STRK%3AMEBIDX%3AIT

 

Hydration bladder tube clips x2 (To stop the mouth piece hanging around!)

£4.24 - Free P&P

http://www.ebay.co.uk/itm/331547596152?_trksid=p2057872.m2749.l2649&var=540745311118&ssPageName=STRK%3AMEBIDX%3AIT

 

Cheap red laser (For plinking!)

£7.99 - Free P&P

http://www.ebay.co.uk/itm/330903690379?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

50x stickers (Going to cover my rifle case in them... sigh!)

£2.29 - Free P&P

http://www.ebay.co.uk/itm/252013454557?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

 

 

Also ordered our team patch this morning from "Stitch me up"!

 

kLQurD6.jpg

Aengus likes this

Share this post


Link to post
Share on other sites

nice patch design and them stickers - I see Lozart in the centre getting in on the action

Lozart likes this

Share this post


Link to post
Share on other sites

nice patch design and them stickers - I see Lozart in the centre getting in on the action

 

Thanks man!

 

Yeah, they were a steal! I'll definitely be ordering more..... for my walls

Share this post


Link to post
Share on other sites

TM Famas with 4 mid caps and 1 Hi cap.

TM Pump action with 7 30 round shells.

TM Hi-CAPA 4.3 with 2 mags.

 

£200 all in and meet a fellow enthusiast and all round good egg.

 

Oh and a WE Holo Sight, Black Chest Rig, Gun bag, Bolle X800 goggles and other assorted odds and sods.

.

Ian_Gere, proffrink, Monty and 3 others like this

Share this post


Link to post
Share on other sites

Just bought one of the new combat machines for cqb. Really snappy trigger response. The guy in the shop said I was the first person to buy one as he only just got them in.

post-10125-0-08061200-1438502312_thumb.jpg

Share this post


Link to post
Share on other sites

Also bought a glock serpa holster while I was there bargain at £18

Share this post


Link to post
Share on other sites

I was thinking of popping down for a holster & some bb's

 

Wonder if he does 1911 serpa holsters ??

Share this post


Link to post
Share on other sites

nice stock on them and the revised polymer receivers look nice - no big white CM

got their own special unique electronic trigger switch unit & fet

is that the 3 round burst mosfet in there on the new SRL models

 

very nice looking gun

(I'm sure their fet's and the new trigger switch is gonna be ok)

Share this post


Link to post
Share on other sites

I was thinking of popping down for a holster & some bb's

 

Wonder if he does 1911 serpa holsters ??

Yeah he does Nick

Share this post


Link to post
Share on other sites

nice stock on them and the revised polymer receivers look nice - no big white CM

got their own special unique electronic trigger switch unit & fet

is that the 3 round burst mosfet in there on the new SRL models

 

very nice looking gun

(I'm sure their fet's and the new trigger switch is gonna be ok)

Yeah weirdly I'm not even an m4 fan but this one won me over.

 

It has a 3 round burst yeah. Not sure I'll use it as my cqb site is single shot only.

Share this post


Link to post
Share on other sites

not 100% certain but sure you can toggle 3 or 1 shot mode

I know it must be very anti-geezer-ish but maybe it might be worth a look in the

 

man, manu, - damn it is so hard to say it

 

M A N U A L - manual - done it, woohoo that is always a tricky one to say let alone look at & use

 

and yeah - the new receivers and the new craney stock looks damn nice

Sacarathe likes this

Share this post


Link to post
Share on other sites

I've had a look at beastmodes New rifle

 

Very nice & very light, it feels like plastic but it isn't plastic, it has the metal key mod rail aswell, more weight at the back so it'll be heavier with a battery, its got dual fire selector & mag release catches plus ambidextrous charging handle

 

only draw back about the stock is the spring loaded pin doesn't lock into the holes without some man handling

Share this post


Link to post
Share on other sites

I've had a look at beastmodes New rifle

 

Very nice & very light, it feels like plastic but it isn't plastic, it has the metal key mod rail aswell, more weight at the back so it'll be heavier with a battery, its got dual fire selector & mag release catches plus ambidextrous charging handle

 

only draw back about the stock is the spring loaded pin doesn't lock into the holes without some man handling

think it is a new polymer receiver but with metal keymod rail

 

pretty sure it is a plastic/polymer receiver or it really is f*cking good value if them new CM receivers are metal

 

the extra dosh over a £130-£150 normal polymer receiver CM is for the 3rnd fet and keymod rail

much like the bot 300 - just a single shot fet using old style polymer CM receiver

 

Stock is a crane variant of the GOS-V2 or something and should of been fitted to FireHawk amongst others

 

the burst mode can toggle to semi 1 shot or 3 rnd burst by holding trigger for 10 seconds in semi selector mode

 

if its full metal think I gotta make up an excuse to missus to try and increase my G&G collection once more

but really trying to ease up a bit now

 

youtube link but bloke talks like a nob btw:

 

 

me on the other hand I am a nob as well as talking like one :D

Share this post


Link to post
Share on other sites

New mag for my 4.3 Hi-CAPA so I can try fixing its leaky one and not cry if I balls it up.

Monty likes this

Share this post


Link to post
Share on other sites

It's a polymer receiver but feels very strong. Metal keymod rail. And I paid £167 for it so not much more. The reason I got it was for the electronic trigger and mosfit which makes the trigger response really quick. I may eventually swap over to a metal receiver but not to fussed at the moment.

 

I got the 3rd burst to work. All you have to do is hold down single fire for 10 seconds. Then switch over to full auto auto and you've got 3rnd burst mode.

 

I have the srs model which is the 7inch rail.

Share this post


Link to post
Share on other sites

cheers for confirming that sir - still a lovely receiver as I said earlier

saw 1 left in stock last week at LWA but only just about managed to silence the buy me buy me screams in my head

 

the receiver and the stock is what I like the most - the ambi mag & charging handle is not a biggy but the design of receiver is gorgeous etc....

 

very nice gun - time will tell if super duper new trigger switch module is a good robust idea mechanically wise

but only just talked myself out of it - a very very close battle going on in my head

 

sexy gun - slightly jealous but very pleased for ya - reckon we will see a few people going for this 3rnd fetted sexy CM

 

good ol' G&G parts pdf....

http://guay2.com/web/drawings/cm/CM16_SRS_explode.pdf

coz was looking to see if the stock is gonna be called the GOS-V3 or something but not found the exact type/model yet

(might see how much - probably silly money but hey ho)

Share this post


Link to post
Share on other sites

Given the rate at which G&Gs sell, I hope that such a large amount of production of stock guns with MOSFETs combined with so many people using them might actually start to finally make a change in the rest of the AEG manufacturing world. We're long overdue for the likes of G&P, ICS and VFC to be including FETs in all their electric guns, but as per usual it takes about a decade for even small changes to happen.

 

Maybe once a large portion of the market gets accustomed to the much improved trigger response and the other advantages these new G&Gs have, the manufacturers who don't include a FET will have to up their games to carry on making sales.

 

Might well not happen but fingers crossed.

Share this post


Link to post
Share on other sites

alas majority of stuff is just knocked out to keep costs down to remain competitive...

even if fet's fail - the donkey work of wiring in has been done already to replace fet with better bells n whistles one if needed

 

The other thing I'd like to see is like a slightly better build in most guns

Can't be THAT hard, to correct AoE, better head & nozzle ffs so gun performs and functions that bit better

 

Not talking about a mega time consuming custom bespoke build where hours are taken to check/assemble

But surely - stop calling me Shirley

Surely - they could add in a o-ring nozzle, better piston o-ring & better head with AoE nearly done or corrected a bit better than stock

just using a few better parts probably only a few dollars each part would save the owner having to get it done at some point

 

yes a little more cost - but a better performing gun would sell itself even if it cost say $10 to $15 more

until then they will just be knocking out the same old same old stuff that may need finishing off a little

 

Echo1 & Krytac might be using a little more care - but wtf don't the main companies do this anyway ?

Raggedy_man and beastmode like this

Share this post


Link to post
Share on other sites

Hopefully he's using it at strike force in Gloucester next Sunday & if the switch & fet holds up to semi only, then I'll consider swapping out the trigger contacts for the micro switch trigger & fet

Share this post


Link to post
Share on other sites

Got a pair of Bates falcons, my Oakley Si's weren't high enough. Need to have a boot clear out, got too many pairs I never use. Picked up a few more bits for my modern PMC kit and added a few more little bits to my Gothic serpent Delta and ranger kit stash.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now