Jump to content

Having some Mid-Caps Issues


Nickona
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi,

 

okay so these are my first mid-caps and having some issues.

 

I've been loading them using hand (don't have a speed loader yet) and only put about twenty bbs in them so far.

 

anyway when I shoot on full auto a burst comes out and then nothing shoots, same happens on sungle shot.

 

then when i take the mag out I can see the bbs stock in the tube with the spring not pushing them up as they're stuck in the mag.

 

They're knig arms mids, there is also a little turny thing at the bottom, could that do anything?

 

Thanks a lot

Nick

Link to comment
Share on other sites

  • Supporters

Lol do you think you were sent a high cap conversion by mistake?

I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again.

Link to comment
Share on other sites

Lol do you think you were sent a high cap conversion by mistake?

I just put a bit of lube down the spring and fill it then leave for 10 mins and comeback fire them off then do it all again.

 

yea they're not hi-caps the turny thing need a screw driver.

 

how would i put lube down it and what type? and btw I have 5 of them

Link to comment
Share on other sites

  • Supporters

Ah well i have ten pmags and just the stuff that you use to clean the barrel but only 2-4 drops and do it until you get a perfect feed.

Link to comment
Share on other sites

  • Supporters
They're king arms mids

 

There's your problem :P

Few drops of silicon should sort em out

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...