Sign in to follow this  
Followers 0
Sam Shaw

What upgrades does the Snow Wolf M24 take?

7 posts in this topic

I'd assume claastic army m24 parts

Share this post


Link to post
Share on other sites

Sadly not - It's a mish-mash of various sniper parts and it is going to be a case of opening it up to find out exactly what is compatible with what system.

 

As far as I am aware it is mostly VSR and APS2 parts.

Share this post


Link to post
Share on other sites

APS 2 Type 96 Cylinder and Triger mech Internals (Same as i.e. Warrior L96).

 

The hop unit is a hybrid between the L96 and VSR sytle. It is the same hop unit found in the Snow Wolf M99. There is a lever on the side of the outer barrel to allow easy adjustment of the hop.

 

The cylinder itself is the same diametre as APS2 however the area which the cocking lever attaches is not the same so you cant swap cylinders with that of an L96 for instance.

Share this post


Link to post
Share on other sites

field tested this today, running sweet.

 

Will advise to use an AEG soft nub in the hop if you wish to use BBs of 0.36 or higher.

Share this post


Link to post
Share on other sites

There is a free upgrade available to these guns and the vsr range. What you do is remove your cylinder from your gun, which is simple to do. Once your cylinder is removed from your gun, remove your cylinder head and you should see a plastic tube sticking out, going into the cylinder head itself. This is called the airbreak. I cut this off completely and then sanded it down to a smooth finish. By doing this I noticed I gained around 50-70 fps. This is a nice, cost free and consistent upgrade.

 

I hope this helped. :D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0