Supporters Liam Porter Posted August 23, 2011 Supporters Share Posted August 23, 2011 Is it possible to remove the flash hider from a JG G36C? If so, how? I've tried turning it both ways, it moves a bit but then stops, it's a cheap gun, so I'm worried it'll break if I use too much force. Thanks. Link to comment Share on other sites More sharing options...
bigshep Posted August 24, 2011 Share Posted August 24, 2011 Have you had a look to see if there is a small allen key on the bottom of it? There may also be a small pin stuck in the side of it, as well as shed loads of glue on it. however reading here, means you may not be able to http://www.airsoftretreat.com/forums/index...ic=98805.0;wap2 Have read a few forums via google where they are having real issues getting these off without damaging the barrel. Link to comment Share on other sites More sharing options...
Supporters M_P Posted August 24, 2011 Supporters Share Posted August 24, 2011 Try using a hair dryer on it, that could melt any glue. Or pm sarni, I think he has a suppressor on his Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.