Jump to content

accuracy


ronniep
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

i wud like help with making my m4 more accurate.

 

i am useing polished/ seamless bbs.

 

i also have been playing with the hop up but that doesn't seem to

be the prob' as the bbs seem to be araticly landing in a 4 inch diameter circle

 

can i change the barrel to a thinner inner barrel without causing probs,

if so which barrel is best

Link to comment
Share on other sites

  • 2 weeks later...

best bet here is to take the barrel out and measure it so you can see which barrel your going to need fitted.

 

Marksman you should know better then to suggest the Madbull inner barrels! Personally I would go for Prometheus 6.03 EG Barrel Steel inner Barrel and as its a AEG don't put in a 6.01 as your just have jam after jam after jam in it. Also you could put a systema hop rubber in it ;)

Link to comment
Share on other sites

I have a SRC m4a1 and im having same kind of problems which could be both hop up and air compression.

 

when hop up is on even slightly it tends to jam alot (using polished bbs) so im not really able to adjust the hop up much.

What is the difference in the hob rubbers?

 

and what would be the best method of improving air compression?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...