Ronin0033 Posted April 9 Share Posted April 9 (edited) On 08/04/2024 at 11:23, Impulse said: Forgive me if it's been asked, because it undoubtedly has been asked somewhere in these 272 pages, but does anyone have ideas for a hop setup for heavy BBs? My retro CQBR is wonderful hopping .32s, but my mk12 is really struggling to lift .4s at 1.64J and just about manages it at 1.88J DMR limits, but I want to run .43s at 1.64J because Warhead do good BBs at good prices so I want to swap to using them, but they only do .32s or .43s, no .4s. For what I was thinking, I was considering a sixG nub (because I have actually yet to try one...) and something like a relatively soft Unicorn or ML MR bucking, maybe a 60 degree. At the moment I have tried the Jaeger Precision titan nub, which was really inconsistent, and a number of omega nubs (regular, 50 degree and 80 degree), all with a variety of ML MR buckings. I’ve set up my DMR with a Modify tan hop and Bavtac nub, I haven’t tested it in the field yet but it’s easily hitting 60metres with a .40 in testing. Running at 290ish (1.56j). Still have adjustment in hop with the Bavtac nub so could use .43 easily I would think. Edited April 9 by Ronin0033 Impulse 1 Link to comment Share on other sites More sharing options...
LazzurusMan Posted April 12 Share Posted April 12 Need some help from experienced mws users! Friend is currently getting his mws and my noveske set up for next weekend at tuddenham, and my noveske has jammed 4 times, and now when he tries to fill the magazine he was using it immediately vents out the top, as iff the vaalve on the magazine is stuck. Any ideas what this could be, and how to fix it?? Link to comment Share on other sites More sharing options...
woody_2231 Posted April 12 Share Posted April 12 (edited) 5 hours ago, LazzurusMan said: and my noveske has jammed 4 times 20240328_171751.mp4 Does the jam look like this? Are you experiencing it on TM mags? Edited April 12 by woody_2231 Link to comment Share on other sites More sharing options...
LazzurusMan Posted April 12 Share Posted April 12 (edited) 1 hour ago, woody_2231 said: 20240328_171751.mp4 19.45 MB · 0 downloads Does the jam look like this? Are you experiencing it on TM mags? I'm not sure. My friend has my rifle atm as he was setting them up as I pick my daughter up. It has happened before, and from what I remember the bolt goes forwards but the bb doesn't enter the chamber properly and the entire magazine of gas gets vented. And it's happened with both de mags, and tm type 89 mags. Edited April 12 by LazzurusMan Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted April 12 Share Posted April 12 Mags aren’t seated properly, either not high enough or they rock. Add a touch of Velcro / tape to the rear of the magwell, pretty common with these. SSPKali 1 Link to comment Share on other sites More sharing options...
LazzurusMan Posted April 15 Share Posted April 15 Me again. Trying to fit a nineball bucking to my friends mws, and the hop chamber won't sit together properly, and won't let the barrel and hop enter the outter barrel. Is it a bucking issue? Am I putting it on wrong? It doesn't seem to fit as well as the autobot bucking he wants to replace (why I don't know, these autobot bucking seem to be amazing to me). Link to comment Share on other sites More sharing options...
Impulse Posted April 15 Share Posted April 15 My experience with autobot rubbers is that they seem to be great in everything that isn't an MWS or AKM. I have autobots in damn near everything, my sniper rifles, my pistols... but not my MWSs or my AKM because they were just horrendously inconsistent and flung BBs all over the place. Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted April 15 Share Posted April 15 Which nineball bucking are you trying to fit? Lined up the grove’s correctly? Photos of setup will help. Link to comment Share on other sites More sharing options...
GothicGhost Posted April 15 Share Posted April 15 Is the MadDog MK18 Conversion kit any good? Link to comment Share on other sites More sharing options...
LazzurusMan Posted April 16 Share Posted April 16 5 hours ago, Wavey_Gravey said: Which nineball bucking are you trying to fit? Lined up the grove’s correctly? Photos of setup will help. Managed to get it to fit. It was a nineball wide airflow (whatever that is) 5 hours ago, Impulse said: My experience with autobot rubbers is that they seem to be great in everything that isn't an MWS or AKM. I have autobots in damn near everything, my sniper rifles, my pistols... but not my MWSs or my AKM because they were just horrendously inconsistent and flung BBs all over the place. I've not had a chance to test mine properly. Love the autobot in my pistol, so hoping it'll work well in my noveske. Link to comment Share on other sites More sharing options...
iNoobster Posted Sunday at 20:03 Share Posted Sunday at 20:03 Huge list, i tried reading through. I am planning on getting this with 3 extra mags. Can someone point me to a better deal? I really wanted the MK18 but thats super expensive. Also worried that it says you will get type89 mags or MWS mags? Also if you want to point me in the right direction in what to buy to get the MK18 look and some good to have upgrades, please pop some links below ❤️ Thanks. Link to comment Share on other sites More sharing options...
zizivert Posted Sunday at 20:16 Share Posted Sunday at 20:16 During my research I found this in french thread: Petit retour après avoir testé des chargeurs type 89 dans ma MWS: parfaitement compatibles. Ils sont quasi identiques en dehors des marquages de munitions et d’une couleur plus sombre que le gris d’origine. Le poids et les performances sont les mêmes également. Et ils ont l’avantage d’être en stock chez AE! In english and in short, TM mag type89 are compatible with our Mws. Link to comment Share on other sites More sharing options...
Impulse Posted Monday at 07:26 Share Posted Monday at 07:26 (edited) So, finally got to test my mk12 MWS with the sixG nub and stock TM hop rubber. Initially I was a little disappointed as while it hopped .4s, it required me to put the hop all the way on and I want to be running .43s through it once I get through these .4s. However, as the hop rubber started bedding in it started hopping way better and when I tested it with some of my friend's .43s it fired like a dream; it's set up at 1.8J (ish) and locked to semi as a DMR. Hard to get a gauge on what the effective range will be because it was stupidly windy on Sunday, so will have to see on a less breezy day to properly zero the scope and see where I can reliably put rounds. Edited Monday at 07:27 by Impulse Davegolf 1 Link to comment Share on other sites More sharing options...
Davegolf Posted Tuesday at 08:14 Share Posted Tuesday at 08:14 (edited) Always remember to wash your new rubbers with fairy and hot water guys n gals! Use your nylon barrel rod to turn it inside out without damaging it Edited Tuesday at 09:15 by Davegolf Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted Tuesday at 08:32 Share Posted Tuesday at 08:32 16 minutes ago, Davegolf said: Always remember to wash your new rubbers with fairy and hot water guys n gals! Well, I've never done this - does it make a difference? Just to get any factory residue - silicone etc off it? Link to comment Share on other sites More sharing options...
Davegolf Posted Tuesday at 08:45 Share Posted Tuesday at 08:45 11 minutes ago, The_Lord_Poncho said: Well, I've never done this - does it make a difference? Just to get any factory residue - silicone etc off it? Indeed, how does a rubber impart backspin? Friction. This is why you always want the rubber bone dry of all lubricants. Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted Tuesday at 09:26 Share Posted Tuesday at 09:26 39 minutes ago, Davegolf said: Indeed, how does a rubber impart backspin? Friction. This is why you always want the rubber bone dry of all lubricants. I appreciate that - I suppose that I have never thought the buckings would be contaminated from new. Link to comment Share on other sites More sharing options...
Davegolf Posted Tuesday at 09:50 Share Posted Tuesday at 09:50 All plastics and rubbers when moulded use a 'release agent' during manufacturing. The_Lord_Poncho 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now