Jump to content

Tippmann Upper Receiver Reassembly


Airsoft_Mr B
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all,

 

Can anyone help to explain what I have done here? I'm sure I put the upper receiver back together as it should be, but the recoil block comes way too far out the back.

I don't have my HPA tank filled atm so switched back to CO2 and it looks like it punctured the bulb and yet didn't release any gas, and the thing won't shoot at all.

 

Hope you guys might have some suggestions but obviously I can provide more info if needed to resolve.

 

Thanks

J

IMG_20180217_103543.jpg

IMG_20180217_103557.jpg

Link to comment
Share on other sites

  • 3 weeks later...

try putting the metal long u shaped part in the correct position. links bolt to front plastic area and must fit in correct position.

 

Link to comment
Share on other sites

Hi,

take a look at this video. It's for a new valve in a Tippmann but will hopefully give you an idea of where you might have gone wrong:

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...