stemith Posted February 13, 2018 Share Posted February 13, 2018 Hi, My son has just bought a second hand, "unused" SRC G36C gen 2 aeg, he's also got a g&g green bucking, o-ring nozzle and metal spring guide, to start off, while fitting these we noticed that the cylinder was NOT ported, the barrel in not tight bore but is only 247mm in length, should I be concerned?? Link to comment Share on other sites More sharing options...
Supporters Samurai Posted February 13, 2018 Supporters Share Posted February 13, 2018 A ported cylinder would be better but the g36 has a v3 gearbox so it won't break just because of this. Will work, just not on optimum. Link to comment Share on other sites More sharing options...
stemith Posted February 14, 2018 Author Share Posted February 14, 2018 nice one thanks Link to comment Share on other sites More sharing options...
Hangtight Posted February 14, 2018 Share Posted February 14, 2018 Got a Dremel? They're not difficult to port yourself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.