Jump to content

TRMR Multi-Shot Base rearm problem


warlord
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I recently bought a second hand TRMR and then decided to upgrade it to the multi-shot base. After fitting the base and firing the first 209 primer I then found it impossible to rearm by turning the dial to the next primer.

 

Turns out his is a known issue. So thought I'd post it here for others to find.

 

This is the response I received from Phillip at JD Airsoft.

 

Quote

The issue is not the base. The issue is one of two things.

 

1. The TRMR is an older version which has a different inner base which allows the primer to balloons due to the slight space inside.
2. You are using higher powered primers. We found that the old Cheddite and WInchester are slightly higher powered than the new Fiocchi we are stocking.

 

This issue we are aware of and is duly noted on the instruction manual here: https://dl.dropboxusercontent.com/u/7732657/guides/Multi%20Shot%20Base%20manual.pdf

 

It is not a product failure. If you need any further enquiries please don't hesitate to ask.

 

Phillip.

 

19059340_10212699315145100_8283020594702864988_n.jpg

18951119_10212699417947670_5711293659971924036_n.jpg

18921660_10212699417387656_947916570714739313_n.jpg

Link to comment
Share on other sites

thanks for this. I've been having this problem recently and actually do use Cheddite primers

 

I too just unscrewed the base slightly in order to turn to the next primer but now i know what the cause is

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...