Jump to content

WE mags for toucan big bird keep discharging


Joshua williams
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

  • 2 weeks later...

sounds like the nozzle/piston needs a bit of oiling 

just take top slide off and drop a blob of oil in and moving back and forth with your finger should do the trick  

Link to comment
Share on other sites

  • 3 weeks later...

Hi again, tried your advice but the mags are still discharging. Started using WE nurpol black gas and am keeping Abby well maintenance gas in the mags but they're still discharging. Any further tips?

Link to comment
Share on other sites

describe what's happening is it venting after one of two shoots or straight away when u put gas in the mag

sounds silly but are u filling the mag up with the bottle of gas upside down

if you can a video is always good  

Link to comment
Share on other sites

The mags vent after 3 or 4 shots (they get really cold really quickly if that helps). I'm filling them up with the bottles upside down as well, I'll have a look on YouTube as well.

Link to comment
Share on other sites

does the top slide get stuck in a particular places like does it stay to the rear or does it get stuck just be fore it fully forward and does it do it every time in the same place or is it different position when venting

as sounds like some thing is not lubed properly or the hop up rubber has swollen and nozzle cant reset properly but that would be after shot on not 3/4

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...