Jump to content

G&G cm16 raider dissassembly issue


ofteninneedofhelp
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi everyone, sorry to ask a question with a probably very simple answer!! There is a tiny pin located just in front of the fire selector switch and it seems to be holding the gearbox in place. The pin is not easy to bang out and I'm slightly worried to hit it too hard in case I damage something. Does anyone know how to remove this pin or is something else keeping the gearbox from moving?

Thanks for any replies!!

 

 

WP_20170214_16_16_50_Pro.jpg

 

Update: I managed to bang the pin out most if the way but it stuck and i was still unable to get the gearbox out. Any advice??

 

Link to comment
Share on other sites

Also when you put it back in, put the smooth side in first, this make it a lot easier, also if you have trouble removing it one side flip it over and try from other side 

Link to comment
Share on other sites

  • 2 weeks later...

The online guide I used last night did not show me this pin!! 

 

Took me ages to work out why the gearbox was not coming out GRRR B)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...