silver145 Posted January 29, 2017 Share Posted January 29, 2017 Hi all, Please see the attached explosion diagram for G&G warthog - i require the bolt/washer circled in the diagram but am unsure of the length/size needed. (kept coming loose and fell out!) Cheers Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted January 29, 2017 Supporters Share Posted January 29, 2017 Oooooh that is a special order part that..... nah - it is a M5 threaded bolt aprox 40mm to 60mm it varies coz some stock tubes & the rear "lug" the tube mounts onto vary the rear mount for the stock tube can stick out 1 inch or 2 inches etc..... so I'd say measure the lug or mount for the tube eg: 40mm & add on about 20mm and it should be about right failing that careful cutting to suit & clean the thread ok with a m5 nut before fitting if no m5 tap ahh f*ck it just buy a few lengths - cross head jap/dome/button bolts or something fleabay or B&Q or hardware store but it is M5 thread is the answer to your question oh and a m5 washer - pref slit spring washer I think Link to comment Share on other sites More sharing options...
silver145 Posted January 29, 2017 Author Share Posted January 29, 2017 Legendary sir!Will go and buy a bulk load and play till i get it right, was very annoying mid-battle the gun butt going "wobbley"!!! Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted January 29, 2017 Supporters Share Posted January 29, 2017 aye a wobbly butt can be very annoying in battle I tend to go for fixed tight one myself - a fixed stubby stock I mean not adjustable but almost any battery will go there than squeeze in nunchuck type batteries really need to make a medium fixed stock imho a stubby is great for a firehawk but too short of regular guns a full size fixed stock is a tad too long for me I feel think G&G really need to make a medium Raider with a medium fixed stock and screw all the wobbly bits & messing about with battery options - but hey ho some other guns have a stock that isn't adjustable and you just deal with it but the subby & full are a smidge too short/long sometimes - hey ho as I said happy hunting & you will soon have a firmer butt/stock if it wobbles a bit too much slip some tape - electricians or bit off gaffa/duct tape on stock tube that should reduce any crane stock wobble that occurs sometimes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.