Jump to content

KRYLON SPRAY PAINT REMOVAL


sniperslucky
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi,

 

Apart from white spirit (which is taking forever to remove a paint job ) any other products that will remove the spray paint without damaging the gun.

 

Thanks

Link to comment
Share on other sites

  • Supporters

Hi,

 

Apart from white spirit (which is taking forever to remove a paint job ) any other products that will remove the spray paint without damaging the gun.

 

Thanks

Tar and Glue remover works an absolute treat. Strong and takes it off pretty easily a few minutes
Link to comment
Share on other sites

Fairy Powerspray. Makes it bump off. Spray on, work it in to all the cracks, leave for about 15 minutes, then wash off. May need a bit of scrubbing as well to loosen any stubborn bits,(try an old tooth brush) but it comes off very easily.

Link to comment
Share on other sites

Fairy Powerspray. Makes it bump off. Spray on, work it in to all the cracks, leave for about 15 minutes, then wash off. May need a bit of scrubbing as well to loosen any stubborn bits,(try an old tooth brush) but it comes off very easily.

Unfortunately the new citrus version is no where near as good, not even close and the original version has now turned into the quest for the holy grail it's so hard to find (i even think fairy have stated that they have discontinued the original in favour of the new citrus version).

 

Anyway there are many ways of getting it off, just google it there are hundreds of threads and videos with different methods.

Link to comment
Share on other sites

  • Root Admin

Isopropyl alcohol will remove it slowly and carefully on plastic - if it has a primer layer or lacquer then it's less effective though. On metal it's pretty good as well. If it's metal then normal paint stripper is fine (depending on the finish) as most won't remove an anodised finish but may remove powder coat.

 

Obviously don't use stripper on plastic as it'll do a fair bit of damage.

Link to comment
Share on other sites

Depends what's underneath. Acetone will take it off easy, but has a really nasty effect on ABS plastic (in fact it'll melt it, badly!)

Link to comment
Share on other sites

Fairy Powerspray. Makes it bump off. Spray on, work it in to all the cracks, leave for about 15 minutes, then wash off. May need a bit of scrubbing as well to loosen any stubborn bits,(try an old tooth brush) but it comes off very easily.

Just googled my local sainsbury and it said they had it in stock ( original green bottle)?

Link to comment
Share on other sites

Petrol is safe and works well but won't remove all types of paint, cellulose thinners will remove all paints but do not use on abs plastic only metal or polymer

Cellulose you can buy in Halfords

Personal experience is not massive but I have used cellulose on a plastic G&G raider, a&K m249 and we scar, petrol on ics as cellulose will melt the plastic

Link to comment
Share on other sites

  • 1 month later...

Hi,

 

Apart from white spirit (which is taking forever to remove a paint job ) any other products that will remove the spray paint without damaging the gun.

 

Citrablast I think it's called by prochem that's good for krylon ! The missus swears by it apparently !

Thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...