Jump to content

Mr Monkey Nuts

Members
  • Posts

    841
  • Joined

  • Last visited

  • Days Won

    7
  • Feedback

    0%

Status Updates posted by Mr Monkey Nuts

  1. Are all V2 cut of lever made equal? will a SHS or "ultimate" work with an APS GB shell?

    1. Sitting Duck

      Sitting Duck

      The correct answer is no they are not all made equal

      People have fitted BTC Spectre's and had to switch/change COL's

      Usual TM compatible bollox - they all sort of work

      Some better than others, some " lift " more, and the stock ones in most china guns are made of same $hit metal they will wear out in about 10k to 20k and semi no longer functions cozthe COL no longer lifts the trolley off the sear :(

      The answer is they "should" work ok and be made of a decent steel or steel(ish) material to last  while

      SHS switches and COL's have worked ok for me in a few different boxes but not rebuilt an APS quick change shell so can't confirm

       

      TBH - anything new should be fine & if decent strong material it should last a while - don't just use any old crap lying around as it is most likely worn or soon will be, I'd say go for SHS as they are very easy to source

  2. Taiwangun order in with an expired UKARA, lets see how on the ball customs are ...

    1. Show previous comments  1 more
    2. jcheeseright

      jcheeseright

      'how on the ball customs are'... good luck.

       

    3. Roundel91

      Roundel91

      only one way to find out i guess...

    4. TheFull9

      TheFull9

      Stuff gets stuck sometimes even with an in-date UKARA entry. They're pretty on the ball. Hopefully they won't decide your RIF importation attempt is a criminal one..

  3. New gearbox stuck in Heathrow Customs for a week now... GRR!

  4. What are currently the best Pmag Midcaps?

    1. Show previous comments  11 more
    2. Lozart

      Lozart

      @cyrexx that is quite frankly the best thing I've seen all day. Thank you.

    3. Mr Monkey Nuts

      Mr Monkey Nuts

      bitch please im not opor8r, im so l33t tier one kids ring me up asking for advivce, couple of years ago they were all like "yo dawk just dumped my whirleybird in some dudes garden" so i told em "just waste em all and say it was osama blud" true story! pffft opor8r! bitch please I WAS ON THJE BALCONY DONT YOU KNOW!

    4. Mr Monkey Nuts

      Mr Monkey Nuts

      anyway .... so any other good budget mags?

  5. Where do people find out about Milsim Games? is there a central resource?

    1. jcheeseright

      jcheeseright

      nope, I've just bookmarked the main providers; stirling, combat airsoft group & tier1.

  6. anyone know where i can get replacement lenses for my Revision Desert Locust goggles?

  7. PUSH UP! How about you come up to the front and push up d*ckhead!, we are not moving because we are pinned into an ambush you led us into!

    1. Sitting Duck

      Sitting Duck

      lol - why is always the mouthy push up git always at the back.

      Me thinks its the same tw*t who when the team are stealthy hand signals etc...

      C'MON LETS GO !!! - tw*t you just gave us all away

    2. Esoterick

      Esoterick

      I like leading charges but normally you turn around and everyone is still where they stood :(

  8. genuine mil spec pouches in ranger green that will fit P style mags ... go ...

    1. Show previous comments  5 more
    2. Mr Monkey Nuts

      Mr Monkey Nuts

      they only do the standard mag pouches though don't they? I cant see the new elastic or fast mags, the GHK don't work with the standard pouches and because they are plastic lined don't stretch out.

    3. Mack

      Mack

      Flyye are clones of EI stuff yeah.

    4. Spatch

      Spatch

      Not sure where you got your info from but warrior normal open top M4 pouches do work with ghk mags, I know as I used to run them myself dude

  9. Should I get a Dan Wesson revolver?

    1. SeniorSpaz87

      SeniorSpaz87

      The question should be: should I get ANOTHER Dan Wesson revolver? Cause the first should already be on its way :)

  10. Can't decide if i want a Multiglam Plate Carrier or a Coyote Brown Plate Carrier?

    1. Show previous comments  7 more
    2. Spatch

      Spatch

      Nothing wrong with 1983 and we weren't wearing OD then, 'twas DPM, coyote tan doesn't really work much in this countries terrain, coyote brown there are far too many differences in supplier colours

    3. jay83

      jay83

      anything but multicam!!

    4. Mr Monkey Nuts

      Mr Monkey Nuts

      but ... but ... but how can one be Opor8rz without multicam? and the extra 36 feet it gives the bb and the option to chose to take your hits or not.

  11. customs charges. how much would you have to pay to import a £350 (post vat) gun?

  12. Can anyone recommend any good facebook "buy it / Sell it" groups?

    1. kungfumonkey
    2. CaptainDumbass

      CaptainDumbass

      The community are full of wankers on that group, not all of them, but most, they will turn anything into a bully fest if they get the tiniest opportunity to.

  13. I'm really tempted to paint the barrel and scope chrome on my BAR10, vsr pro hunter style ...

    1. Unrustle_Thine_Jimmies

      Unrustle_Thine_Jimmies

      Why paint? Strip off the old paint by sanding then polish the ever loving balls off the things. It would look cool,I agree,now concealment is another story :P

    2. Mr Monkey Nuts

      Mr Monkey Nuts

      Now you see that sounds like an awful lot of hard work! I take my concealment lessons from Peter Griffin "you guys are stupid, there going to be looking for army guys!"

  14. Anyone know what guage wire the Gate Pico mosfet uses?

    1. Lozart

      Lozart

      Whatever gauge you solder onto the pads at a guess...

    2. Mr Monkey Nuts

      Mr Monkey Nuts

      So they don't come pre-soldered? perfect that just what i needed to know, Thanks

  15. is there a difference between a sniper barrel and an AEG barrel? Specifically the hop up end?

    1. Hudson

      Hudson

      Depending on what gun it's for, yes.

      VSR barrels use a different bucking style compared to AEGs, so the hop window is fully open.

    2. Hudson

      Hudson

      Or at least somewhat smaller, depending on the make, with different grooves to attach the bucking.

    3. Hudson
  16. Can't decide between spending £90 on an elcan spectre or put towards a dedicated BAR?

    1. Monty
    2. Mack
    3. Mack

      Mack

      get all my optics from them, delivery is usually cheap and they allow you to put down your own customs declaration.

  17. Starting to get a bit fed up of flipping gas mags now!

    1. Show previous comments  6 more
    2. Mr Monkey Nuts

      Mr Monkey Nuts

      I have 4 GHK mags, each one has popped a leak at different times, in different places, they have mostly been solved by just tightening the cylinder heads down, but one stays airtight, but starts leaking after a few days.Tonight it has had all new o rings ptfe and a bloody good lube so should hold up for a while now.

    3. Mr Monkey Nuts

      Mr Monkey Nuts

      myTM mag had a leak too, it dumped all the gas, filled it up to see where its coming from and its was perfect grr!

    4. jcheeseright

      jcheeseright

      if you need to do a quick and dirty fix on a slow leaking mag, fill it up and chuck it in a bowl of hot (not boiling!) water.

  18. Is anyone placing an order to Taiwangun? Fancy adding a few BBs and splitting the postage?

  19. Interesting ....

    1. Show previous comments  4 more
    2. jcheeseright
    3. two_zero

      two_zero

      actually, the airsoft did the least damage to the eye...

       

      however at 13 min, the one he is using is not even penetrating a can? unless they are using thicker/harder cans over there?

       

      It's also a very valid point he is making that these injuries rarely happens at airsoft events (as we got security rules) but rather when messing about at home. AND quite importantly that ricochet seem to be responsibly for a lot of the injuries..

       

      and yes indeed, very intere...

    4. two_zero

      two_zero

      very interesting video indeed, thank you very much! :)

  20. I really can't stand player marshals! You either play or marshal, I have yet to meet one that remain impartial enough to do both!

    1. Show previous comments  6 more
    2. Mr Monkey Nuts

      Mr Monkey Nuts

      Actually on hindsight I have met a few very good player marshals, maybe I should re phrase my venting to: I can't stand 12 year old power mad marshals who get prissy when they are losing.

    3. M_P

      M_P

      I don't think anyone under 18 should be marshalling anyway so in that case yeah agreed

    4. team flex

      team flex

      I played against one

      HE was sniping, bright orange jacket, thought he was a marshal so I didn't shoot, only to get shot by him... -_-

  21. Where can I get a buffer tube with holes in for rear wiring?

    1. Show previous comments  4 more
    2. Mack
    3. Hibernator

      Hibernator

      Is there not a channel you can run the wires through rather than drilling? There should be a gap in the underneath attachment point and a channel running up the stock tube to run the wires below the washer thing - which should have a notch cut off the bottom for the wires to run under

    4. Mr Monkey Nuts

      Mr Monkey Nuts

      I scoured ehobby ,but never spotted that, Thanks Mack!

  22. Anyone know how long delivery from samoon usually takes?

    1. Lozart

      Lozart

      EMS Express doesn't usually take too long. Did they give you a dispatch estimate/delivery estimate?

    2. Mr Monkey Nuts

      Mr Monkey Nuts

      No not yet, payment is taken but not dispatched yet.

×
×
  • Create New...