Jump to content

Thokarn

Members
  • Posts

    46
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Thokarn

  1. This advert is COMPLETED!

    • For sale
    • Used

    For sale is my boneyard PTW clone. This is an FCC Battlearms Development cerakoted, which has been modelled after the M4 CASV. The parts included are: - FCC Battlearms Development reciever (Cerakoted) - Steel systema outer barrel - King Arms CASV rail - Regular M4 crane stock - SHS steel gearbox - High tourqe motor Internals are as follows: - Black cylinder - Etiny Electronics - High tourqe motor This developed a fault whilst being used in woodland where the RIF started to jam owing to BB debris. This supposedly caused the gears in the lower gearbox to strip. The RIF still functions if you have the upper split from the lower. However when you close the upper onto the lower, the RIF cannot fire properly and will make a high pitch grinding noise, making it seem as if the gears are struggling to cycle the cylinder. I do not know enough about PTW systems to fix this, nor can I spend the money doing so, so I'm putting this up for sale at a fair price for someone who is competent with these PTWs. Before this issue, this was shooting at 347FPS. Included with this sale are: 6 functional magazines (black cats 120 round mags and a systema 120 round steel mag) 3 non functional magazines A&K and Systema (please ignore the AEG midcap in the picture) The RIF has a RWA hopup already installed (See pictures) I will include the old hopup chamber if I can find it. I am looking for £280 in total, including shipping. Alternatively can be picked up from Central London.

    £280

    London

  2. This advert is COMPLETED!

    • For sale
    • Used

    For sale is my VFC AVALON Calibur. Modelled after the HK416, the VFC calibur is an attractive and distinct piece. It has served me well as a back up AEG, but unfortunately is not being used as much. This was run only using a 7.4v lipo in my time using it. Hop up rubber has been recently replaced as the old one tore. FPS tested on the 23/02/2024: 312FPS - On .20g BB with no hop added using a 7.4v lipo. Gearbox internals are all stock and have not been tampered with. Included are: 6x 90(I believe) round metal midcaps 1x QRS high cap £250.00 (shipping included) Alternatively, you're more than welcome to come pick up from Central London!

    £250

    - GB

  3. Heya are you considering swaps?
  4. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    For sale is my used Cybergun Cyma P90. It's compact. It's iconic. It's durable It has an integrated Red dot with 2 levels of brightness. Perfect for CQB and some woodland sites. It has a few scratches here and there but overall in good condition, was brought and used for a game at Dogtag Airsoft.# Selling as it's not seeing the use it should get as I have a PTW. It comes with three low cap 70 round magazines, a sling and a P90 mag pouch. Price is £140 including postage

    £140

    London - GB

  5. This advert is COMPLETED!

    • For sale
    • Used

    ARES APC9 + T1 and 8 mags (1 short 60rd, 1 medium 90rd, 6 long 120rd) Gun has been skirmished once and is in good condition. Also comes with Tamiya to Dean's adapter that's not shown in the pictures. Performance is great on 11.1v lipos. The trigger response is really nice and snappy allowing faster shot reaction making it good for CQB. £310.00 including shipping. Will consider nearest offer.

    £310

    London

  6. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale or swap
    • Used

    Hi there, For sale is my TM M9A1, I've owned this for approximately a year and a half and it has served me well. It runs extremely well and is very gas efficient. Condition is used as it's my primary side arm, so it's scuffed up in a few places on the slide. Comes with 5x magazines that I will get serviced before sending the gun out. I'm based in central London for pick up. 130.00 plus shipping

    £130

    London

  7. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale or swap
    • Used

    ********PRICE DROP********** For sale is my Tokyo Mauri AK47 TYPE 3 Recoil. I purchased this back in 2018 and have enjoyed thoroughly using it but looking to switch over to a GBBR platform or AR platform of any kind. This AEG has probably been the most fun AEG I've used in a while, mainly due to the realistic functions such as the recoil, the bolt mechanism with the bolt stop, having too rack the bolt after running out of BBs just adds something to your level of play at a skirmish. Externally I've changed the faux wood to real wood, courtesy of Apple Craft Works who sell the wood kit; I've also sprayed the gun in black as I didn't like the level of sheen the base gun had. This can easily be removed with acetone/nail polish remover. If I can find it I will include the original faux wood stocks and handguard. Internally it is stock and shoots around 290FPS, which may seem low, but more than makes up for it with the magical TM Hop Up, I can easily hit targets up to about 60M give or take. There's only one problem with this RIF at the moment; the blowback on the bolt will not move sometimes when you shoot, but generally works 70% of the time. The gun itself will come with 5x 90 Round Midcaps that all have the bolt lock function. Included in the box is a mag adaptor that you slot in the magwell to use any other brand AK mags without the bolt stop function. The gun will come with a rail adaptor that replaces the AK leaf sights, so you can add a optic. The case isn't included nor is the batteries since I won't be able to post the RIF if I do. £340 in total + plus shipping but willing to negotiate on price. I can do collection too.

    £340

    london

×
×
  • Create New...