BloomBoy

Nope sold that a few weeks ago, should be marked as sold😁😁 

Dean connectors & a bigger battery.

You are a bit screwed due to buffer tube as explained earlier.

Probably a MILD 11.1v 20c max battery in its present form

The STD FH should have a 8 tooth sector taking 18.65 gearing to about 22.5:1 hence why most stock STD FHs have a slower rate of fire that day CM18's, plus they have a slightly stronger springer perhaps to help attain 330fps on a 110/120mm barrel.

The motor should be the blue G&G powerful motor which is not bad - aprox 25k rpm so it isn't the sluggish grey 18k STD G&G motor. But the 8 tooth bevel or 22.5:1 gearing to help the slightly stronger spring on the short barrel gun slows it a little.

11.1v long term use could wear trigger contacts long term but then all guns wear anyway. Keep the juice mild, 9.6v or modest 11.1v 20c max.

Thing is just use the damn thing

The main thing with a modest rate of fire gun is learning trigger discipline. Don't release trigger too early on semi or it might get stuck in the dead zone. The trigger goes stiff - DONT FORCE IT !!!!

What you need to do if trigger feels stiff is switch to auto fire a small burst then switch to semi once more hopefully the trigger functions correctly. There is a point where the Cut Off Lever is still raised and at this point it prevents semi operating correctly.

It is sod's law but often happens if you release trigger a smidge too early on semi. This is more prone to happening on a slower rof gun than a quicker rof gun imho.

Can also happen on any gun going from auto to semi if you are unlucky, not often but can/does still happen from time to time

Noob mistake is force trigger and bust up the Tigger trolley switch mechanism

SO DONT FORCE A STUCK TRIGGER

As said just use it, get used to it all.

High rof is mainly for show

Often it isn't the gun, it's rof or even it's super duper range accuracy....

It is the player that wins the game, tactics and skill play a much bigger part than an awesome gun

Stand to one side at the dead zone when you are out the game and watch the real skilled players finish the round.

They don't move they glide, not running around like a headless chicken shooting like hell. Watch them shoot at actual targets, switch a pistol in tight cqb with single shot - pop pop pop game over

THAT is how it is done, no crazy crap required. Some mofo's even go out with a springer plinker, rubber banana object thingy just for kicks to set themselves real challenges

Or pink piggies if you are Mall Mofo

Just use the gun, enjoy it, learn to improve your own performance as THAT is the best upgrade. Alas no quick easy upgrade in that area.

Sure a good snappy gun helps, but still no excuse for real skillful ability

Besides, they are all just toy guns, do just enjoy the peew peew for what it is, than think you must do upgrades n stuff asap

ATB SD

Gate Titan, 11.1v Lipo.

Sounds like i should buy it  ......... Do you know if im able to get an electric trigger system and MOSFET installed if so what one shall i get????

TBH you "can" do whatever you like

you could go nutz and put a Titan in there

or something like that - a fully internal setup

(as the buffer tube battery will limit space for an external mosfet)

But you don't need this stuff straight away - gun is important thing

What I have done is removed the fancy stock & buffer tube

Then fitted a stubby fixed M4 stock - hard to source locally

(may have to buy from Hong Kong China etc for about £20)

It is a tiny bit short the stubby fixed M4

(Full fixed M4 is a tad too long - need to make a medium fixed)

But on the FH it works well as it is tucked in tight for CQB

Then you can use almost any battery like cheap block lipo's

Than mess about with thin bespoke buffer tube batteries

Try not to buy the HC05 version - a slow DSG version

There is NO SEMI and this gun is a nice CQB gun

But with no semi a lot of sites in CQB it is semi only

(you haven't got semi so you are f**ked)

Failing all that the new G&G Raider 2.0 is a nice looking gun

2 options are avaliable

regular (no ETU version)

or ETU version for about £15 more

The G&G ETU setup can be picky though

So me personally I'd go for non ETU version

There is the CM18 G&G but comes with a mid-cap mag

so need a speed loader to fill 120 rnd mag

There are some nice G&G's out there for about £150-£160

FireHawk and/or CM18 are two of my favourites

(mainly coz they are reg old school non ETU stuff that works)

FireHawk is nice - bit loud, get a stubby M4 stock if you can

(saves battery agro)

But that is just my take on it all - no fancy must have stuff needed

Just a gun, eyepro, bb's and a chilled common sense no ego attitude 

I think its a great gun, my friend put his tracer on it, and it really makes it a lot quieter but still has a nice enough sound, should you wish to be slightly quieter. I remember people around me saying "if you hear a firehawk its our team"