Just_Jack 1991

hello, i know this has been covered a fair few times but its just a quick question, so i had upgraded my gun internals to a ProWin hop up unit and a MadBull Shark type hop up rubber with a H type nub. performed alright throughout the day, didnt need to change the hop up after i had it set, at the end of the day (last match) it just started double feeding, i had probably had about 2,500 bb's through it and then no matter what i did it would not stop double feeding, im guessing its an internal issue but as i have never had to deal with double feeding before i dont know the most common causes. any help would be greatly appriciated

nice, will have to get some more details

i must know where i can get myself one of the first picture?

hi i am wanting a bit of advice! so i have made my TR16 A2 a bit of a project to learn about all the different things you can brea......i mean upgrade in a AEG, im no tech by any means, i just like to open things up and see if i can improve them. so my G&G started life as a top tech which is a pretty great starting point, when i took it out for my first skirmish with it it was firing alright, the groupings wernt amazing but i could correct for most of it. and then started the land slide of mods, so its now got a ProWin hop up unit in it as the original hop up would adjust itself (the usual) MadBull hop up bucking and the H nub that comes with them (still havent got around to flat hopping) M110 spring (firing 328-330 fps) a new front hand guard (because who doesnt like bling) and thats about it, i dont like the lack of RIS rails on top, having the solid hand grip is a pain, but i could just buy a new gun.....so im not complaing to loudly. i have just ordered a promithius 407mm 6.03mm tight bore barrel to increase mine from 363mm 6.05 as stock, should finish it off, havent done any gearbox work appart from having it shimmed (to fiddly, much anger!) what i am looking for advice towards is how to when i change this barrel make everything happy with each other so i can get the most out of the gun without having to strip it down again to adapt and change things? im looking for the longest range i can squeeze out of it without going all out, i have watched many a video on using dental floss and the likes to seal the barrel into the hop up unit, and i have read up on AoE and the likes, which has (apparently) been set up, its still got the standard piston and piston head on it, and the original air nozzle, i have checked the piston and piston head for compression and i could not for the love of me get any kind of air leak out of it. so yeah, general advice for finishing off a gun that i would like maximum range and accuracy please? i dont use it for QCB and i have a side arm for really close encounters = ]

Okay so what about my LiFe battery I am running? Is LiPo the way to go or am I in the right ball part with LiFe?

Hi guys, just a thory but I'm a vaper and I use efest 18650 batteries in my device, these batteries are 3.7 volts per battery 2500mah and have 35amp continual and 60 amp burst per battery, now I know there's more to it but in thory if I were to run two of these batteries you would have 7.3 volts running at 2500 mah or if you like 11 volts? My main reason for this thory is I know from the vaping world these batteries are very safe, easy to charge and last a long time, anyone had this thought before or even tried it?

hi guys im starting out again after stopping around 17, now 23 i have bought myself a Umares tokyo soldier ak47 beta spetsnaz and a WE-Tech P229 blow back gas pistol. how do you guys rate these if anyone has them?