All Activity
- Past hour
-
Dan Robinson reacted to a post in a topic: Ukara for non UK airsofters
-
I have had decent service from Cage too. Just minor upgrades to a working pew.
-
Shamal reacted to a post in a topic: Ukara for non UK airsofters
-
Shamal reacted to a post in a topic: Tell Us a Gag. Please!
-
Egon_247 reacted to a post in a topic: Ukara for non UK airsofters
-
Skullchewer reacted to a post in a topic: Memes to chill the f#ck out
-
Skullchewer reacted to a post in a topic: Memes to chill the f#ck out
-
Skullchewer reacted to a post in a topic: Airsoft-Forum Patch Poll
-
Skullchewer reacted to a post in a topic: I Don't Know Your Site Layout
-
Nobody move, this is a threadjack! You're in the Reading area? Come over to Red Alert airsoft, where you'll also find @StackUpAirsoft Okay, threadjack over, as you were. 😁
-
So, I finished work early this morning and rather that go straight to bed I got on my hands and knees to look for the missing anti reversal latch spring from Wednesday afternoons shenanigans. Much to my surprise I found it in the exact place that I had looked when I first lost it! So, all rebuilt, which is great but I didn't need to purchase a complete gearbox spring set and gearbox clip, but I now have a different issue! I shimmed it but a couple of the bearings now protrude out of the gearbox. One of them is causing an issue that it sits underneath the safety selector switch and interferes with it. It protrudes by 1.12mm I've had a look but you don't seem to be able to get thinner bearings so what do you suggest? Admittedly, I haven't played with it properly and it might be fine but I'll have another look later on after some much needed sleep.
-
Skullchewer reacted to a post in a topic: Ukara for non UK airsofters
-
custom gbb workshop TAIWAN T75 pistol SRC gbb airsoft deep marking grip remove orignal paint detail fix https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjudN3cuK3iMX8ATQvAO05qNfb3IlG3L1Uj6mehFpSnS3VFtnYLC_tI3xLESiRikAKDlhNIKglYH1ad02K_vmks4wdnJY1P2morY_iccphMDGljQ6Org2NEKK6c5h6iaMyfzK-iiERy5LNZL9sAJKsUA9ve4H-KV76YggPInuXxehilPUCfMKfiMXM9XTg/s1200/03.jpg[/img]
- Today
-
My airsoft only loads when there's no mag
DanBow replied to Oli_Bacon's topic in Guns, Gear & Loadouts
You need to be really specific about what actually breaks, how it breaks and what you do to resolve it. Pictures or, ideally, a video will help is diagnose whats wrong. The vagueness of your description is of no use. As you say, they are complicated things with many parts that can go wrong. -
Just quit my job at the circus. My boss was a fucking clown...
-
Tactical Pith Helmet reacted to a post in a topic: Tell Us a Gag. Please!
-
I actually have on my CV: 'C in GCSE Physics Understanding of BB weight upon exterior ballistic performance of 6mm plastic BB, as presented in posts on AFUK.' I reckon that's worth a couple of grand extra a year surely?!
-
My airsoft only loads when there's no mag
Oli_Bacon replied to Oli_Bacon's topic in Guns, Gear & Loadouts
It's the top part, the one you pull back -
My airsoft only loads when there's no mag
DanBow replied to Oli_Bacon's topic in Guns, Gear & Loadouts
What part breaks? Have you got any pics of the broken bit? -
Well, the image shows the airsoft, the mag and the laser part. What it matters here is the mag and the airsoft. It only loads when there's no magazine, basically. Actually, I can load, but it would kind of break and I would have to open it up and do a really complex thing there. It's a spring airsoft. Can I fix it? Thank you for helping me.
-
Oli_Bacon joined the community
- Yesterday
-
wooskii joined the community
-
Whokka joined the community
-
Anything WE, Kyairsoft is the place to go. RA-Tech has a lot of hype however there’s a lot of horror stories of bad QC, tolerance differences messing up. Personally I haven’t bought any RA-Tech parts based on the poor feedback I’ve seen though. In terms of longevity, my WE G36 is my most used GBBR being fielded pretty much all summer for the past few summers and the internals are all holding up well!
-
ben98 joined the community
-
I don't have any specific experience with the SCAR line but I can say that WE are decent for the price 👍 The trigger components do tend to wear faster than with more expensive GBBR companies but as Gavin said, parts are available from KYAirsoft. (I have bought quite a few bits too) You can also get a Steel trigger pack from Ra-Tech like THIS (Reliable shop) So keep it serviced and enjoy 😁
-
keef1234 joined the community
-
-
-
Time Left: 6 days and 15 hours
- For sale
- Used
Tokyo Marui breacher, working and converted to HPA - comes with an M4 magazine adaptor. Only been skirmished once so all working nice and in great condition. Shell door has been removed and isn’t included. Looking for 260, or 270 posted. I can also include a PTS EPM magazine for extra£270
- GB
-
-
-
-
Time Left: 6 days and 14 hours
- For sale
- Used
Pentagon Lycos Jacket and Trousers (Green) Trousers 38"W 32"L Jacket L Links https://www.military1st.co.uk/k02023-06cg-pentagon-lycos-jacket-camo-green.html https://www.military1st.co.uk/k05043-06cg-pentagon-lycos-combat-pants-camo-green.html I've used these once but since I've changed my load out they are no longer needed. Near new condition. £40 Inc fees and postage.£40
-
I've bought some parts from here with no issues... https://www.kyairsoft.com/ . I've not fielded mine yet due to a previous owner fecking up an npas installation but it was easily fixed with the parts I got from kyairsoft. I'm a Scar fanboi & this is probably one of my favourite pews, kinda waiting for decent weather to use it in game but recently ordered some red gas but I suspect it might be a bit hot for my local site (hense the npas), I got 5 or 6 mags with it & 2 of them have lost the base plate so make sure your's are solid on the mag. The mags are hefty so use sharpshooter sized mag pouches if you wear molle. fyi... I found it easy to strip down for maintenance but make sure ALL the screws are tight as I found a couple of my body screws loose & one was missing (assuming they loosened due to the GBB). I'm sure I've seen a couple in the classifieds with missing or broken fore sights so check it over & tighten/adjust them as you see fit.
-
Time Left: 6 days and 14 hours
- For sale
- Used
Some items for sale. 1. AR AEG outer barrel parts £10 2. ASG EVO Scorpion Carbine outer barrel £10 3. 3d printed Mlok handguard for Scorpion Evo £20 4. S&T complete GB and motor. Took from a boneyard G36C. Motor works, but GB doesn't SOLD 5. S&T standard G36C stock. Fully working £8 6. S&T G36C length hop n inner barrel £10 7. M4 standard handguard given a dirty acrylic wash £5 8. MP5/G3 Red Dot. Fully working. Fits my ICS and TM G3 but not my CYMA MP5 or my CA33 SOLD 9. S&T standard G36 magwell £5 10. PEQ15 with light/green/red laser. Cheap model, SOLD 11. PEQ15 battery box with laser SOLD 12. Grip SOLD 13. Keymod Moe Grip SOLD 14. M16A1 Grip made for the front handguard. Comes with screw/washer SOLD 15. Angled Grip SOLD Additional: Visionking 1.25x5 LPVO. Bought recently but would prefer a genuine 1x rather than it start at 1.25x. Great scope though. Comes with replica DE Geissele mount. Looking for what I paid for it. SOLD Replica EXPS3 558 Red/Green dot. Painted to match my MK18. £35 G36/M4 magwell. Bought new. Mounted once then taken off. Comes with a high-cap mag. Dusted look. £15 LE Stock Rubber Butt Pad. £5 Repro Geissele scope mount. Been lightly painted. 30mm rings. £10 Tokyo Marui G3 Sliding Stock. Will also fit JG and CA models. Light dusting. £25 20mm Rail flip up sights. DE and Black. £10 Torch and PEQ15 switch unit. Mlok and 20mm Rail mount £10 Postage extra. Buyer covers fees plz. More pics on request.NO VALUE SPECIFIED
-
-
If you don't know the difference between "there", "their" and '"they're" then your an wally
-
Time Left: 6 days and 14 hours
- For sale
- Used
For sale Magpul M4 by G&P with 6 magpul branded mid caps and 1 magpul highcap, VP 7.4 lipo, VP lipo, carry bag, genuine magpul sling, qd suppressor and original box. Gun has been slightly upgraded with aftermarket gearbox shell, shs full metal rack piston, gate nanohard mosfet, and a magpul replica ubr stock, could do with a spring change as is shooting under 300fps£300
-
Hi all, I’m a relatively experienced airsofter & have been playing with AEGs for the past 18 years… Recently I’ve dipped my toe into the GBBR world & come into possession of a WE open bolt SCAR H. This thing is an absolute beast & the recoil is mega. Just wondering what the verdict is on these things? Like, what’s the life expectancy of the stock parts… is there anything I should consider upgrading before even playing with it? Any advice ref parts & reliable UK based retailers/stockists for said parts would be great. Thanks in advance!! Picture is just for attention…