All Activity
- Past hour
-
Colin Allen reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Sounds like my memoir.... hahaha. Apart from the drink. I do like a drink, but at home as its cheaper. Plus im a boring bugger too haha.
-
Mark AB joined the community -
Time Left: 6 days and 23 hours
- For sale
- As new
For sale is my Cyma 048 which I bought but changed kits so it never got fielded. Only ever had one mag through it to test. Has a high torque motor, silent piston and silent cylinder head and steel gears. Being an 048 it’s mostly made of stamped steel and the furniture is real wood. Comes with 1 unopened NUPROL 140rnd mid cap, included 500rnd high cap and short 20rnd style 250rnd high cap, as well as a 500rnd flash mag that I’ve had for a while and I’m unsure if it feeds properly. Also comes with a mini tamiya to deans adapter. would like proof you go airsofting whether it’s gear pics, bookings for matches etc. £200 and I’ll pay for postage feel free to ask questions on WhatsApp£200
-
Rather wet day at Spartan woodland today, briefing and first game was lots of rain then mostly cleared up for the day, humidity was high and my fat ass was sweating non stop, even had sweat dripping over the mesh goggles and filling the holes so at points it became difficult to see. VSR was all over the shop, it's old and well used so it's probably time to retire it to a wall hangar and get a new bolt action. M190 did it's usual trick of going full auto after half a mag so meant I couldn't use it half the time as some sections of the site are semi only. Sand viper performed well for my first game day with it, only used it in the first game alongside the M190 as I run dual pistols with the VSR. Switched out to the MP5 and USP from game 2 onwards and thoroughly enjoyed every single second of it, 5 mags kept me going nicely and got quite a few kills with it. On .3's it was doing well out to about 60m but definitely need to get a new barrel and bucking as it's not super consistent and overhops towards the end of flight but managed to work around it for the most part today. Second to last time I decided to take the Mac out with me too which was a hoot even in single shot, will definitely be taking out both next time and running them both in auto for some giggles. Sadly in the final 3 phase game the red dot got shot out on the MP5 in the first phase, right after i'd spent the intermission zeroing it so a little bit gutting but it's only a cheapy and a replacement is about £20. I even bought a sight protector for that exact scenario and decided in the morning it would be fine without... Hindsight and all that. All in all a great day and got to know a few people and played well with them and very much looking forward to the next game day.
-
Cruston joined the community -
Time Left: 6 days and 23 hours
- For sale
- Used
Green helmet, m/L with new padding. Fma amp headset, noise canceling and radio. Comes with the headband to run without the helmet as well. £70£70
-
Time Left: 6 days and 23 hours
- For sale
- Used
Frag c grenade. Fully working £50£50
-
Nick G reacted to a post in a topic:
VFC M249 Thread
- Today
-
This! Play with it a couple of times to find out what you want to upgrade.
-
I'm gonna suggest if it was genuine TM in the £500 GunSmith Bros kit he'd definitely be mentioning it.... Also drum mag on a gbbr tell me thats been run on ridiculous round counts at stoopid pressures with out saying "I'm a speedsofter".
-
Colin Allen reacted to a post in a topic:
tokyo marui upgrades
-
Time Left: 6 days and 22 hours
- For sale
- As new
5.56mm - .223 inert 100 rounds linked ammunition belt. Postage £5.00£49.99
- GB
-
Time Left: 6 days and 22 hours
- For sale
- As new
Brand new only opened to take the pics. Bought on a whim from Patrolbase, but never used. exactly the same condition as it arrived in so brand new. Still has the fluid bottle full. £45 delivered.£45
-
Time Left: 6 days and 22 hours
- For sale
- Used
1 ares with ares drop in hpa engine. Comes with original aeg box and motor. 1 spezna base gun with polarstar gate fitted. Programed for semi .dmr Pick up only£550
Sheffield - GB
-
Time Left: 6 days and 22 hours
- For sale
- As new
In excellent second hand condition. Has a 3d printed spacer within the slide to house the nozzle return spring as the slide design seems to have changed internally when I fitted a new one. Has luminous style glock night sights. Comes with leak free tm magazine Shooting vid£103
-
Wheelie joined the community -
ButcherBill reacted to a post in a topic:
The "Share A Bargain" Thread
-
Time Left: 6 days and 22 hours
- For sale
- Used
For sale is my unmodified KWA KO EVE-4 AEG - A compact SBR that has insane value for money out of the box! It is made out of rock solid polymer that will take a beating on the field. It has an FPS adjustment via a screw inside the battery compartment. It has a 3-point collapsible stock, a long picatinny rail on top for optics plus an M-LOK hand guard at 3, 6 and 9 o’clock for your grips and lights. There is a M-LOK grip included at 6 0clock as standard with the EVEs. The EVE-4 has Safe, Semi and Full Auto fire modes, accepts M4 Magazines and has the charging handle forward in the hand guard that reveals the hop up adjustment in the ejection port. Also included is the original box, manuals, a KWA sticker, 2 tools (one for the QD sling points and M-LOK rails/grip and the other for the FPS adjustment), a 120 round mid-cap magazine with an extended follower, a speedloader, 2 QD sling points that can be attached on the receiver and 2 M-lok rails already attached to the hand guard at 3 and 9 o’clock. Furthermore, This replica comes with an air tech studios battery compartment extender. I lost the original cover and battery space was cramped out of the box so I brought this extender to allow longer batteries to be used. This does stop the stock from collapsing fully but it still comes in far enough to have 3 points of adjustability. It is in a great used condition. I have owned it from new and used it for a few game days outdoors so it looks new from afar and up close it has the odd scratch and tiny bits of mud here and there. Open to offers, Sold as seen, No refunds, No postage with RIFs - cash on collection ONLY. The first time I tried posting a RIF it got ‘lost’ so I wont be doing that again! Any questions, feel free to send me a message. Thanks for looking.£200
Aylesbury, Buckinghamshire - GB
-
Time Left: 6 days and 22 hours
- Wanted
- Used
Want 2 vfc v3 mags£35
-
Time Left: 6 days and 22 hours
- For sale
- Used
Sor sale is the installation tool set for the Ares Kar98K & ZF39 scope. You use this tool set to drill and tap the airsoft receiver to install the ZF39 scope mount. This original Ares tool set includes: -TOOL-003 -Tap Wrench -Drill Bit -Screw Tap Although the tool set is designed for the Ares Kar98K and Ares ZF39 scope, I purchased the Ares ZF39 scope and installed it on my Double Bell shell ejecting Kar98K using this tool set. In theory, you can use this tool set, along with the Ares ZF39 scope, on other brands of Kar98K, perhaps with some modifications. You will need a certain level of drilling and modification skills to use TOOL-003 on the receiver successfully. Note: The ZF39 scope and scope mount are NOT included in this sale. For sale is the tool set meant to help you drill four holes in the receiver to attach the scope. More info on this tool set: https://www.aresairsoft.com/scope/tool-003 Tool set: £10 Shipping & pp fee: £4£10
-
-
BigAl reacted to a post in a topic:
The "Share A Bargain" Thread
-
Hudson reacted to a post in a topic:
tokyo marui upgrades
-
Time Left: 6 days and 22 hours
- For sale
- Used
For sale are three AK magazines. Polymer body with metal base plate. 2 x mid-cap 1 x hig-cap Not sure about the brands, but they fit my Cyma, Cybergun and Specna Arms 3 x mags: £10 Shipping & pp fee: £5£10
-
G&p xm177e1 , full working... Picked up for £65 from my local site
-
Lyndication reacted to a post in a topic:
VFC M249 Thread
-
ButcherBill reacted to a post in a topic:
The 'What have you just bought' Thread
-
The 'What have you just bought' Thread
Anonymoose replied to Cameron364's topic in Guns, Gear & Loadouts
I'm never surprised to see you post in this thread. 😛 -
All the kids joining in the school holidays to ask dumb questions (where they'll probably ignore the answers if it's not what they want to be told) or try to sell their kit for stupidly high prices
-
I bought a Midwest Industries for my A&K 249. Beautifully made piece. Unfortunately not a direct fit though. Found a suitable CO2 cylinder for you guys with the VFC:
-
Use the gun and see what actually needs changing if anything
-
Cannonfodder reacted to a post in a topic:
tokyo marui upgrades
-
Cannonfodder reacted to a post in a topic:
tokyo marui upgrades
-
Tokyo Marui MP7A1 GBB SMG + 4 Mags + Original box & contents
Bran_da_Don posted an advert in Gas Rifles
Time Left: 6 days and 21 hours
- For sale
- Used
For Sale is a used and unmodified TM MP7A1 GBB SMG with 4 spare TM magazines. The original box is included too with all the manuals, magazine, 14mm ccw barrel adaptor, barrel cleaner rod and even the origional pack of BBs. * I seem to have misplaced the two dry fire mag followers however IF i find them then I will send them your way free of charge if this RIF has already been purchased. * The TM MP7 Is truly a fantastic bit of kit. Out of the box, It has a good spread at range and is precisely accurate in CQB. In terms of power, It consistently sits just a few digits under the 350 FPS limit when I’ve used it - very spicy! This RIF is loud and has strong recoil. It makes for a fantastic immersive experience when skirmishing. I often used the 14mm ccw adaptor to stick a loudencer on the front and it often made my teammates jump! The shoulder stock is collapsible with a closed position and 3 open positions to choose from. In terms of rail space, you can find a long piccatinny rail on top with removable flip up iron sites, small rails on both sides and a folding grip underneath. The fire selector switch has a positive click when moving between safe, semi and full auto and the charging handle and bolt release is really fun to play with. Also in this sale are an extra 4 mags bringing the total to 5x 40 round magazines - Plenty of firepower to get you going! This MP7 is in a good used condition. It is fully functional with some minor cosmetic wear that I have tried my best to photograph. Mainly wear where I’ve mounted attachments to the rails and 2 of the 4 sling attachment points are worn from where I’ve attached slings in the past. One issue I have encountered with this platform is not to do with the gun itself but rather the 5 magazines (or possibly all TM MP7 mags?). They all hold gas however sometimes they like to dump all of it when the trigger is pulled. It looks like the valves get stuck in when this happens and you have to manually try and get it back out. I’d say it is roughly a 40% chance of this happening every trigger pull. I’m still at the point in my airsoft journey where I like everything to perform great out of the box so with my lack of airsoft tech knowledge this mp7 was a pre-mature buy on my part. I’d imagine you may know already how to fix the magazines? Or just HPA it as the actual gun itself is 100%. Open to offers, Sold as seen, No refunds, No postage with RIFs - cash on collection ONLY. The first time I tried posting a RIF it got ‘lost’ so I wont be doing that again! Any questions, feel free to send me a message. Thanks for looking.£340
Aylesbury, Buckinghamshire - GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
Selling my pride and joy, unfortunately I don't skirmish it much compared to my other pistols, so selling this off to a good home. main upgraded internal parts are the CTM Lightweight bolt in gold, as well as a 200% recoil spring, results in a very snappy pistol. I've also added a semi only plate onto the bolt. Rest of the internal parts are stock. It does have some scratches on the top of the receiver which i've shown on the photos Externally comes with the CTM Wood grips which i've stained and varnished. Asking for £120 which includes postage and packaging + paypal fees Note, it does not come with a magazine£120
-
Time Left: 6 days and 21 hours
- For sale
- As new
For sale is a pretty much brand new unmodified AAP 01C Shinobi GGB Pistol. It has only been used a few times for back yard plinking and hasn’t been skirmished. It’s in fantastic condition and is fully operational. The Magazine does have a slight leak however - i’d imagine it’s an o-ring somewhere inside but you’ll probably know more about it than I do as my airsoft tech knowledge isn’t that great! The mag is also compatible with Glocks too. Open to offers, Sold as seen, No refunds, No postage with RIFs - cash on collection ONLY. The first time I tried posting a RIF it got ‘lost’ so I wont be doing that again! Any questions, feel free to send me a message. Thanks for looking.£50
Aylesbury, Buckinghamshire - GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
Not sure on make . Don't use anymore 2hold gas three leak but out top so easy to sort out for someone . Selling all 5 together no splits£55
