All Activity
- Past hour
-
Pretty standard with a TM. Spend loads of money on aftermarket parts and then desperately try to get it working half was well as it did stock 😄
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
selling my beloved mtw with the best set up possible dropped in including: SI hop up 6.01 pdi inner barrel 4uad bucking SI blue nub (extra g&g green with the SI black nub) i’ve also decorated it with: genuine magpul stock repro daniel defence rail arisaka handstop novritch 1-4x scope this is sold as a bundle which has dye armotech 1.1l super lightweight tank wolverine storm regulator with amped airline hose and 4 brand new pts mags which were bought a month ago i can provide proof and will be sent or picked up in an evolution gear gun case selling due to enjoying gbbr more for cqb no trades preferably cash in hand will ship if the buyer covers g&s and postage this runs for over 1500 when new£1,100
weymouth, dorset - GB
-
Gunny reacted to a post in a topic:
Gun picture thread
-
Gunny reacted to a post in a topic:
Show us your plinking target setups
-
Time Left: 6 days and 22 hours
- For sale
- Used
Looking to sell my Cyma rpk Hpa it’s has a backdraft hpa engine inside used for less than 3 hours a brand new 4uantum pro high performance bucking and nub a amped igl in brown , a retro arms speed trigger and a foam filled suppressor it will come with two ak drum mags both work and 4 mid caps and 1 high cap mag also a vector optic looking for £360 ONO collection only West Yorkshire / Pontefract£360
- GB
-
Time Left: 6 days and 21 hours
- For sale
- Used
Selling my Nuprol Delta Pioneer Defender, brilliant first Airsoft rifle but now got an upgrade so no longer need this one. In perfect working order, shoots lovely and comes with the original box & manual, 1x 1300mAh battery, iron sights, 100rnd Speed Loader, a brand new stock with cheek riser and QD sling points & a dual tamia to 4 pin connector for multiple battery charging. Excellent budget friendly rifle for someone just starting out. Can also come with a bottle of bb’s if needed.£100
- GB
-
.thumb.jpg.1cb9b5570620a4a63da29082775a3ead.jpg)
6 PTS EPM 30R/120R Magazines for Tokyo Marui NGRS - M4/SCAR
danlangster9721 posted an advert in Parts
Time Left: 6 days and 21 hours
- For sale
- Used
All are in perfect working order. 6 mags available in total, £20 each or willing to bundle all 6 for £105 - for context these were £30-35 new. message for any question!£105
-
Ryzan Online Ltd joined the community -
Time Left: 6 days and 21 hours
- For sale
- Used
Bought this off someone on here month ago as a bit of a backup gun when I was running my old sniper load out but have since gone down the GBBR rabbit hole by getting a MWS so need money for mags, parts etc. The RIF itself is a NGRS M4 SOPMOD base, which has then had a Daniel Defense M4A1 12.5 inch RIS II (Madbull RRP £122) rail fitted. Internally it’s totally stock, as NGRSs should be! Included are two LIPOs both wired to MR30 as the RIF is as well - deans to MR30 adapter also included in the box. Both batteries are balanced and have run me comfortably across a day/event going through 3300 BBs! 2200MaH 1450MaH Shoots between 0.8-0.9J using 0.3s, TM hop magic slings them out to a really impressive range for the power. One point to note; the empty mag detection doesn’t currently work - this doesn’t impact the function of the RIF. Eagle6 sell replacement leavers for £20 but I’ve not been bothered about having this feature, price will be adjusted accordingly due to this. Doesn’t include mags as I’ve listed these separately, have 6 available £20 per mag or all 6 for £105. message for any question!£270
Bishops Stortford, Hertfordshire - GB
-
My brain automatically read that as "Taser" instead of "Traser" and I thought bloody hell that'll get 'em to call their hits 😂
-
Austeyr reacted to a post in a topic:
T238 Nano Traser
-
Colin Allen reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Colin Allen reacted to a post in a topic:
Show us your plinking target setups
-
Time Left: 6 days and 21 hours
- For sale
- Used
Looking to get this gone, it’s a little bashed up but still perfectly good n functional price includes postage£90
-
ButcherBill reacted to a post in a topic:
T238 Nano Traser
-
Tackle reacted to a post in a topic:
Airsoft Hub Closed ?
-
Time Left: 6 days and 21 hours
- For sale
- Used
TM 1911 MEU + 5 mags. All mags gas tight. Very lightly used, excellent condition. (EDIT - Ive also found a Nuprol MOLLE hard retention holster for this too, but not gotten round to taking a photo of it because Im lazy and just adding this in a bump edit) Pistol also has 6.03 tightbore barrel fitted, believed to be JBU brand. Looking for £200, I think this is reasonable as its a £150 gun and about £150 of magazines as well. Would prefer collection in person for you to inspect and ensure you're happy with it but can post if needed. Located in Peterborough. Not looking to split the package at present, or for any trades/swap/part exs thanks - Date mismatch on photos as photos taken from my appraisals thread below, and was too lazy to take all new pics with an updated date.£200
-
The Nano tracer, as the name suggests, is the smallest traser unit made by T238 measuring 23mm by 53mm, making it roughly the size of a C cell battery and perfect for pistols and SMGs. Retailing at £30 I wanted to see if it's as good a bargain as it seems. It comes boxed with a very short charging cable and an adapter to fit 11mm pistol muzzle which brings us to me making a boo boo. The traser unit has reverse threads and after checking the fit of the adapter I accidentally tried to remove it turning it the wrong way with a pair of pliers for extra grip. I didn't put much pressure on it and the whole 11mm threads snapped off. This is 100% my fault but does make me question the quality of the metal used for it to break so easily. Fortunately I was able to get the thing off and fitted it to my MP5K. It has shake to wake with a cut off after 20 minutes of not moving. Oh and it also works with red traser bbs. In both testing and use in game yesterday in worked flawlessly with every bb being lit up brightly making it easy to adjust for any second shots Now the negatives. First there's the question of the strength of the adapter mentioned earlier. Next is the front and back end caps are both made of a frosted colourless plastic so every time the traser goes off the whole area around you is bathed in a blue light. I ended up covering them with gorilla tape to block it out but in the future I might take it apart and paint those bits. The last minus point is another small one. There's no master on/off switch so while travelling to and from site every time the traser unit moves it's switching itself on. Not a big problem but something to bear in mind. All in all I'd say it's a good piece of kit and at half the price of a Brighter C traser an option for those on a tighter budget 7/10 for now. If it does decide to play up I'll post it here
- 1 reply
-
- 2
-
-
Jacob Wright reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Jacob Wright reacted to a post in a topic:
Airsoft Hub Closed ?
-
Macks airsoft dreamers of the week thread
MistakenMexican replied to Mack's topic in General Discussion
What makes you say that? 🤣 -
Anon, the place to rip the shit out of a sale is Mack's... not here. -
Time Left: 6 days and 20 hours
- For sale
- Used
x3 Marui Glock mags for sale. £45 posted. I won’t split the listing, postage costs make it not worth the hassle. Used but all gas tight and working as they should. All 3 have the purple Laylax gas routers fitted. Mags have always been stored indoors and with gas in them. Technically these are 24 round Glock 22 mags. They fit in the TM 17 and 18. They DONT work in my Umarex Glock 19 or my TTI TP22, the nozzle gets stuck on the gas router stopping the slide from slamming forward. They do fit fine and work fine in my TM G26 (bit long obviously!) and my old TM G17 plus a mates G18. I couldn’t tell you if they work in other brands.£45
-
Time Left: 6 days and 20 hours
- For sale
- As new
£30 for 3 bags posted. Stealth tactical BBs, 0.36g, here we have 2 unopened pouches each containing 2500 BBs. The 3rd pouch has been OPENED but has only had about 200-300 BBs used out of it max just for range testing. So you should be getting around 7200 for £30 posted. I bought them a month ago and just didn’t get on with the colour, my eyes aren’t great so I really need white ammo. Sold as a package, I won’t split them it’s not worth it due to postage.£30
-
Time Left: 6 days and 20 hours
- For sale
- Used
In used condition, selling at I dont have the time to use anymore Includes nuprol holster, 1 mag. Video available. Any questions please ask.£60
Norwich, Norfolk - GB
-
I suspect the seller has been reading this thread
-
Time Left: 6 days and 19 hours
- For sale
- Used
In used condition, selling at I dont have the time to use anymore Includes nuprol holographic sight, 2 high cap magazines + the other items in pictures. Any questions please ask.£300
Norwich, Norfolk - GB
-
or... tart it up & buy a 1911 to go with it... a before & after.
-
Neal.z joined the community -
Time Left: 6 days and 19 hours
- For sale
- Used
Unknown make as built from parts over time, the trigger is stuck open, good for a beginner tech who wants to strip and learn how to repair, when working was a good AEG.£75
Aldershot - GB
-
Time Left: 6 days and 19 hours
- For sale
- Used
Selling my total destroying A&K MK46 all metal and ways like the real thing this thing is no joke 70m 'real meters' with 32s Used this 7-8 time, im packing up so no need for anything selling the lot. Built by Luke Simpson a wizard, link below shows fps and all that https://www.instagram.com/p/Cp3Q48GjCfF/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Spec Aimpoint CompM2 BFG Sling Forgrip cant remember the name but it was over £100 Gate warfet 2x Bullgear mags 1 never used Bullgear hop unit Maple leaf hop rubber Xt piston Xt Pistonhead Xt cylinder head Xt nozzle Xt spring Xt 22tpa motor Shs gearset Brand of barrel cant remember but its not a crap one tappet Guarder You gets everything in the pics. Can Ship or you can pick up this thing cost me a lot of money to put together.£1,000
-
The 'How Did Your Airsoft Day Go? Thread
Cannonfodder replied to Skara's topic in General Discussion
I went up to Blackstone in Huntington again yesterday. Upstairs was out of use as they're redecorating and the supposedly dry in 48 hours paint was still wet, despite being done on Tuesday, but this wasn't a problem as numbers were low at only 15. It was my first time using a traser and i noticed straight away how much of a difference it makes knowing exactly where your shots are going All in all it was another excellent day despite the heat and the only negative was rushing to get the train with a minute to spare only to find out it had been cancelled -
bencarter13 joined the community
-
We all have to start somewhere, one of these days I'l strip the blue off it.
-
Jollygreengiant4 joined the community -
Time Left: 6 days and 19 hours
- For sale or swap
- As new
Looking for a couple of cz shadow mags, preferably co2 and in working condition. thanks!NO VALUE SPECIFIED
- GB
-
Time Left: 6 days and 19 hours
- For sale
- Used
TM MK18 GBBR for sale: MK18 + original bits Daniel Defence stock (repro) PTS radian charging handle foregrip Maple leaf crazy jet barrel (250mm) 4UAD rubber and nub Original bolt with NPAS GM Bolt V2 with NPAS + heavyweight 1 genuine gas tight mag Hand guard tool Steel barrel nut (jaeger precision) I can’t remember which NPAS’s I installed in the bolts. Most likely RA tech? Anyway they work perfectly and they have the adjuster key included. It was a massive pain in the arse to remove the hand guard to fit a different hop rubber but it was definitely worth it, you probably know but they use red loctite so i bought a heat gun and did the whole thing so you dont have to! The tool you need to do it is included in this bundle so you can swap hop rubbers no problem and I have replaced the stock barrel nut with the jaeger precision steel one. This MK18 also has the heavyweight buffer on the guns modify bolt but I will include the original weight. This was painted green and then weathered, there is sopme green paint left, easy to remove if you want. I'm not charging for the extra bits like the hand tool and foregrip etc. They're included because when i sell this i won't need those any more so you might as well have them. Esentially all the extras are free. Collection or local drop off from Thornton, Bradford. Alternatively i can post for an extra £16. PayPal G&S or bank transfer.£475
Bradford, West Yorkshire - GB
-
Having a collection of pics like that'll get you a job at Dye precision
