n1ckh

Just wondering if theres any valves similar to say inner tube valves for hpa where it's a one way valve with a ball bearing or something ??? Bored nay tired of losing air from the magazine everytime I disconnect for a mag change. If nothing like it exists, has anyone tried making something similar that works, I don't mind a bit of fettling or modifying

Sorry dude. Misread it.... .ooooops

I believe the part your referring to could either be the nozzle or the NPAS (negative pressure air system) which is located inside the air nozzle. Its non adjustable so you could be hot which is where the RA-Tech NPAS comes into it as its adjustable

Thanks for the replies guys. Done the motor height adjustment like I have on my other M4's (I always start at zero on adjustment screw when removing motor) & its the same issue. That's what leads me to thinking about swapping out the original pinion gear but wanted peoples opinions/thoughts

Double post

I've put a Lonex A2 motor into my ICS sportline M4 & its screeching. The motor height is ok & I know its down to the pinion gear. Thinking of putting the pinion gear from the standard (removed the pinion gear from the slow motor) motor onto the lonex motor. Will I get the screech still if I use the original pinion gear Cheers people Nick

Project box Push to make switch (off, hold to turn on) 9v battery snap On/Off switch I'm making a few hand detonators (cheaper to make than buy them) as my sites won't allow me to use my remote detonators :/ The same components will allow me to make a few anti personnel mines when aswell the hand detonators are done

I use an M4 magwell adapter on my JG G36C & it works ok, you just need to get used to it being a bit fiddly at first to insert the mag but practice makes perfect. The feed tube is not straight & the bb's will not drop out so you need to turn the rifle upside down to fire the 5 or 6 remaining bb's out

I was thinking of getting the same for the October weekender (shame you both can't make it & I'll have to break in a new OC & 2IC lol) Not many sites allow them if aircraft are always around

Recent purchases are Alpha fire remote detonators Electronic igniters (maroons out of stock) Friction smokes & bangs Speaker mic Dynatex timed & impact grenade plus .209 & 9mm blanks Molle waist pack A 2nd programmable radio

Dean's connectors for me but gold 5mm bullet connectors for my radio control vehicles & boats

If it's still under warranty etc, contact the retailer with what is wrong & get them to fix it No point doing any major work to it as you'll void the warranty

Cheers Dave. I'm getting bored of the usual M4 mags & like the look of the pmags, emags etc

I gave it go & still the same problem. I've since read that green label emags should fit

Cheers Monty I'll give that a bash mate