Jump to content

Unrustle_Thine_Jimmies

Members
  • Posts

    1,074
  • Joined

  • Last visited

  • Days Won

    4
  • Feedback

    0%

Unrustle_Thine_Jimmies last won the day on May 17 2014

Unrustle_Thine_Jimmies had the most liked content!

1 Follower

Profile Information

  • Guns
    Marui Gspec
  • Loadouts
    underfunded eastern european military
  • Sites
    Bellurgan Park
  • Gender
    Male
  • Location
    Ireland

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Unrustle_Thine_Jimmies's Achievements

  1. that feel when car insurance is over 6000 euro a year for me so I can't commute to the nearest site that does weekly games (((((

    1. Show previous comments  6 more
    2. GiantKiwi

      GiantKiwi

      You trying to insure a Challenger 2 MBT?

    3. Unrustle_Thine_Jimmies

      Unrustle_Thine_Jimmies

      I'm trying to Insure meself on a 1998 VW 1.9 TDI. 6k. A 2015 Yaris is 3000. Ireland is class :DDDD

    4. Monty

      Monty

      What the f*ck?? Got quoted £200 as a secondary driver right after I passed today for a 1.4 Jazz. Get a bike!

  2. Finally did the TDC mod on my VSR. If you can't afford an Action Army Hop unit and want to get rid of curve,don't hesitate on doing it. I delayed doing it way too much. Deffo worth it for 20 mins of work

  3. Might just be the placebo effect but holy fuck this little thing is good. Noticably better and consistant hop. Getting much flatter trajectory. http://imgur.com/MzvM6dZ Hop up is stock with antiflex plate mod and pdi-w hold. 15 euro shipped,purchased direct from AirsoftPro.cz. shipping took about 10 business days to ireland. Upgrades like this are always nice. Good to get you stoked for the next outing.
  4. Comms upgrade for the big game in August )) Baofeng UV82 and UV-5R 2000UAH / 58 British Pesos from a local distributor,QC'd and pre programmed. Not too bad I hope.
  5. RIP KLMK Onesie 2012-2016 The trouser part was torn to shit and too small for me. Had to do a good amount of stitching at the bum flap and the torn back pocket. Also added velcro instead of using the shitty buttons. Done this ages ago but just dug it out of the closet.
  6. Christ It's been ages since I chairsofted. Anyone try the ASG cursed BBs? Their .28s seems like a great bargain

    1. Qlimax

      Qlimax

      I'm currently the .28 cursed BBs, they're excellent.

  7. Doing my test mid-January,but since my provisional is still valid that gives plenty of excuse to be chauffeur for ma. Driving a 1998 Volkswagen Sharan MPV. Old school diesel,400,000km on the clock. Autotragic which is a shame since the engine has a fair bit of go. Plenty of room for airsoft kit and mountain bikes ))) If I have to get a first car I'd deffo like a small panel van,Like a VW caddy or something. Insurance is cheaper and I need space. I also refuse to be forced to drive a small french death trap. My brother's first car was a standard Clio and it was terrifying to be in. And I've driven/been in Ladas and a fucking Zaporozhets! http://i.kinja-img.com/gawker-media/image/upload/s--HyBBNjA6--/18s06l4wjb71ajpg.jpg
  8. Yep,had the idea to do it from the asf but never bothered since my mags always dropped out nicely. Now they don't due to wear I guess. If I had the time,patience and a non blunt drill bit,I would deffo recommend drilling and looping paracord. I had to melt the nylon lace ends to a 'plastic' form,then lightly sand the mag indent to actually bond it properly because otherwise it came off with a little bit of force.
  9. Some nylon shoelace for like 50c. Made some mag pulls because I found myself throwing my gloves off to reload too often. Used glue because drilling volatile plastic without a bench drill sounds like an awful idea to me. https://imgur.com/ILL0gDF
  10. Will buffing smooth leather boots help water resistance,or is it better to keep it slathered in dry polish and have that waxy texture?

    1. Show previous comments  5 more
    2. Esoterick

      Esoterick

      I use Granger's wax on my boots a couple of times a year, seems pretty decent. Actually got a few spare tins if you want one.

    3. jcheeseright

      jcheeseright

      kiwi polish, brush it on, leave it 20 mins, brush it off. Never failed me.

       

    4. Jedi_Master

      Jedi_Master

      Second the Kiwi polish. If you do not want the shine in the field then just apply it by brush or cloth and let it dry to give a matt finish. Always worked for my combat boots.

  11. Swedish M90 is a killer in the Summer. Italian Vegetato is also extremely effective bar the browner winter months. If you want something nobody else has,and have deep pockets,Check out Prof1Group's 'Varan' (Lizard) Camo. http://p1gtac.com/catalog/verhnyaya_odezhda_5_?color-varan-varan-camo&min=0&max=6815&orderby=1
  12. I dabbled in this mod quite a bit after digging up an old airsoftsociety thread I personally prefer using epoxy to shape the new nub as I find the pencil eraser is inefficient and can cause curving issues at long range I found it jammed up the whole gun when applying too much hop. with epoxy or some similar filling you can file it to shape similar to a Dangerwerx arm,the parabola is way better(in my experience) Of course,the inefficiency problems using a square eraser nub are only with standard buckings,a W-hold in my case,with R-hop or G-hop where pressure is applied differently the M-nub is better I've been told. Maybe I have been doing something wrong using a flat eraser bit or maybe it's because of the way the W-hold works. Every bit of performance is worthwhile and if yours works then no bother at all.
  13. I think it would be a good idea to have a VSR-10 master thread/sticky on this forum section,fair amount of sniper posts coming up nowadays.
  14. Time to sell the old G25 for fund a forcecore AK )))

  15. Welcome to Irish sniping I've talked with a couple of lads to reddit to update myself on what's best and it seems not much has changed. What I run is quite a budget build with a lot of DIY stuff but it can all be replaced with shelf parts. First thing's first,you will pretty much have to play at AEG ranges so be stealthy or quick . Small 3x or 4x optic is good,no point in a massive 3-9x40 like I run. Adding inertia is a good idea,as long as the gun is balanced. PDi-W hold is probably the better bucking for 1J VSR builds. I've been told the Maple leaf has the best sealing quality but is rubbish on it's own. The Laylax buckings have had spotty QC,needing material removal but are still good,though,generally people seem to like the 'split' buckings. I run .28s and .30s,the latter being the max weight for the W hold in my experience. If you want to keep the Stock chamber,you will have to do some work to the adjuster mech as it bends and causes uneven hop pressure. Very trial and error job. Consists of making thin metal spacers and sticking them around the adjuster and arm to increase rigidity. taken ages to get mine right and there's still a tiny bit of curve. Also you will need to invest in a dangerwerx Type B arm or the airsoftpro one to get the best out of the stock chamber. Right now the Action army hop chamber is very popular. If you want absolute accuracy I recommend this. Pdi chamber is a bitch to adjust and the laylax one is expensive. Good barrel always helps. PDi are the best option for Bolt actions. 6.05 bore Steel ones are good. Barrel spacers of course help,you can make them out of masking tape,no different to bought ones. An extreme mod some american lad once did is pouring wax down his outer barrel to seal in the inner. On the plus side,you can save some money since you can stick with the stock trigger mech. I'd replace the piston with one that has a steel catch like the AA or laylax one. SHS or PPS sear set is my choice. I'd chose the SHS piston sear as it's made of softer steel and is the cheapest and easiest wear part to replace. Finally,goes without saying,standard sealing jobs are an absolute must. power output has to be as consistant as possible. The cylinder is an easy job. I am getting 100% full seal using PTFE tape,Stock Marui O-ring on a Laylax piston. Cylidner polished and lightly greased,head tapered and nozzle crowned. The Action army chamber should have good seal. PTFE tape and maybe some gasket maker around the hop bucking and barrel joint is also a good option.
×
×
  • Create New...