-
Posts
25 -
Joined
-
Last visited
-
Feedback
0%
Profile Information
-
Guns
G&G CM16 SR-L
PEQ-5
And Bling -
Loadouts
MTP Molle Plate Carrier.
5.11 Belt Rig CQB -
Sites
Holmbush
West Sussex -
Gender
Male
-
Location
West Sussex
-
Interests
Cover and Movement and to keep up with the endless change to house searches and SsoS.
Hegs44's Achievements
-
Hegs44 reacted to a post in a topic: G&G V2 Gearbox Spec
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
Airsoft Colleagues, Absolutely brilliant and wise advise. I shall "Keep Calm and Carry In Airsofting " Yeah the gun is currently averaging 309 to 318 fps and working fine. Thanks again.
-
Outstanding. Ta "You can have my gun when you pry it from my paranoid, mentally disturbed, physically-abusive, cold, dead hand."
-
Hegs44 reacted to a post in a topic: G&G V2 Gearbox Spec
-
Or I just get a whole new quick change gear box with all the bells and whistles pre done. Suggestions. #ItsOnlyMoney
-
Hi all I have G&G CM 16 SR. Has a " V2" gearbox. I'm pre-planning upgrades of cyclinder, piston head and maybe gears and bushings etc I would like to know what the current spec is of the internals of the stock gearbox. Not found anything on open source. ie. Ratios ? Piston teeth ? Bushing size ? Etc Don't want to open it all up yet to apply micrometer. Thanks
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
The Moment You Realise you Want to try Milsim
Hegs44 replied to Hegs44's topic in General Discussion
and a very noobie milsim type question... do you have to turn up with a complete fire team from L/Cpl to Private fully competant in battfield tactics ? or just join in.. -
Hegs44 reacted to a post in a topic: The Moment You Realise you Want to try Milsim
-
So looking to maybe progress to Milsim events. I've read the healthy threads of "Milsim vs Skirmish" not what I want to start here again. I'm in West Sussex and would like to canvass thoughts, ideas and suggestions for milsim sites, companies, events in the south east 'ish area. Not looking for the "Tier1" SAS selection type of event to start with but certainly something longer than a Sunday Skimish attacking orange bins, (which I wont be stopping as they are great fun). Thanks
-
proffrink reacted to a post in a topic: 6.05mm Barrel upgrade
-
PT247, yeah all good with that barrel (TY) and got new bucking, Hop Up and 2.03 TBB on order to try/test all combinations to my liking ;-)
-
So after much time at work trying to source a 6.05mm bore aeg barrel I've found just about every tight bore barrel in existence. I'm looking to get R-Hop done and want to upgrade barrel at the same time. 6.03 there are loads of. I understand from much reading this is at the edge of R-Hop effectiveness. Over to the forum for opinions and thoughts. I'm upgrading a G&G CM16 SR FOR accuracy purposes, 260mm inner barrel. Ta
-
DEF reacted to a post in a topic: First Day Out With New Site DOH !!!!!
-
Randymanpipe reacted to a post in a topic: First Day Out With New Site DOH !!!!!
-
proffrink reacted to a post in a topic: First Day Out With New Site DOH !!!!!
-
Stick it on my sons Nerf Gun I guess.. (After clearing our broken glass).....
-
I looked at the shield protectors and thought "Naaah Wont need that" 2 X Doh Doh Doh !!!!!
-
The sniper went for the "Private Ryan Shot" and clearly got it !!! Its a WE Tech 887 Holo site. Appreciate I may be on a lost cause but any info on weather parts/repairs are available ? I'm waiting for a reply from WE Europe. Thanks
-
Any update on the stuff arriving yet? interested in a GBB pistol also but been wary of the customs crushers..
-
I have used mlemart on ebay to get keymod rail in allsorts of sizes. They do both metal and polymer. They are a Hong Kong based company but have a direct UK link and delivery only took a week. For you info. http://www.ebay.co.uk/itm/MLEmart-Dytac-Keymod-Modular-Rail-Section-Polymer-5-7-slot-RIS-RAS-Airsoft-New-/331602274807?var=&hash=item4d350929f7
-
djben9 reacted to a post in a topic: Gun "Bling"
-
kerby91 reacted to a post in a topic: Gun "Bling"
-
Thanks all. Good advice from both sides of the fence on gun Bling. Good advice about lasers compromising position, we had that issue at my "work" combined with the fact we all went through the "laser fashion phase" and it made the "target" look like it had measles and no one knew who's round was going where !!! And the fact at my local site they just aren't allowed. I picked up an "as new" Element PEQ-15 on ebay for £25 so I'm happy that I have that as an option in the correct circumstances. Ta
-
djben9 reacted to a post in a topic: Airsoft Etiquett
-
Thanks I've found lots of QD sling mount in various style to cater for the left hander or ambidextrous person. Is it a job for my local armourer to install ? as I'm pretty new to airsoft and certainly dont want to start dismantling things. Also are the mounts generic to all crane stocks or brand specific, there are so many out there between UK and HK I dont know where to start for my G&G CM16 SR. Ta