expendable Posted October 2, 2010 Share Posted October 2, 2010 hey guys am currently running a stock asg g36c ilove it but had it chrono'd for the first time the other week and it was firing at 370 with .2s it wasnt till id nearly put a whole hi cap(470) thru it that it came down to 350. ne ideas on how to lower it further?? Link to comment Share on other sites More sharing options...
bigshep Posted October 2, 2010 Share Posted October 2, 2010 downgrade the spring. Put a j1 in it for around 340fps, or a guarder 90 for around 320 or so. Though if it has dropped to 350 after a mags worth, it should level out around 340 or so in a thousand or two as the spring beds in. Link to comment Share on other sites More sharing options...
abbadon101 Posted October 4, 2010 Share Posted October 4, 2010 Until you have but about 2-3k rounds through it it won't have settled down fully, put a good 4000 bb's through it and get it re corno'd you will probably find it is then clocking 330-40. Or as has been said you may need a new spring either a 1J or a M90. Link to comment Share on other sites More sharing options...
Laird Benjy Posted October 4, 2010 Share Posted October 4, 2010 Unfortuanately those ASG G36's tend to be quite hot. To be honest only having it at 370 s surprising, they tend to be higher than that. I would recommend a spring replacement rather than "trying to bed" the spring and gearbox with a few thousand rounds. Sprng change will give you a guaranteed fps reduction, whilst bedding it won't actually ensure te necessary fps reduction. Link to comment Share on other sites More sharing options...
expendable Posted October 4, 2010 Author Share Posted October 4, 2010 ah k thanks guys just need some kind of permanant fix so think spring change is gona be the best option Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.